diff options
| author | tzafrir <tzafrir@5390a7c7-147a-4af0-8ec9-7488f05a26cb> | 2007-05-17 22:55:21 +0000 |
|---|---|---|
| committer | tzafrir <tzafrir@5390a7c7-147a-4af0-8ec9-7488f05a26cb> | 2007-05-17 22:55:21 +0000 |
| commit | 3af1b5fa2ec86d21762ad1cea81d2b275d4a9d48 (patch) | |
| tree | 12da5f31396b3b1d3f99ed1bad8725bd50120689 /xpp/utils/genzaptelconf | |
| parent | c16f6ead0e9050d59d73f39f3015ecb64aecc214 (diff) | |
XPP revision 3965:
* Tested with zaptel-1.2.17.1
* Add D-Channel TX, RX and BAD frames count in /proc/xpp/XBUS-*/XPD-*/bri_info
* Adjust output of xpp_sync script. Pad for 8 port BRI.
* Added a debugging module parport_debug (not compiled by default).
* Added an optional patch to zaptel:
- compiles only if ZAPTEL_SYNC_TICK is defined
- Allow interested driver to register for "sync" notification.
- Does not affect drivers that do not use this feature.
* Added external synchronization feature:
- Only if ZAPTEL_SYNC_TICK feature is compiled in
- Than XPP may be synchronized by another card (e.g: an Astribank
with FXS can be synchronized by a Digium PRI card).
- May be enabled/disabled in runtime via the 'sync_tick_active' module
parameter to the xpp.ko module.
* Fixed a potential bug in D-Channel hexdump printing.
* New visual indications in BRI leds:
- Constant ON RED/GREEN: Shows the port type -- NT/TE.
- Very fast "double blink": Layer1 work, no D-Channel yet.
- Steady blinking (1/2 sec): D-Channel trafic detected.
* xpp_fxloader moved to /usr/share/zaptel .
* adj_clock removed: never really used.
* Now we have Zaptel::Hardware and a sample zaptel_hardware script (not
(installed by default).
* We also have a sample perl zapconf (not installed by default) which
aims at replacing genzaptelconf (sans the modules detection).
git-svn-id: http://svn.digium.com/svn/zaptel/trunk@2537 5390a7c7-147a-4af0-8ec9-7488f05a26cb
Diffstat (limited to 'xpp/utils/genzaptelconf')
| -rwxr-xr-x | xpp/utils/genzaptelconf | 17 |
1 files changed, 16 insertions, 1 deletions
diff --git a/xpp/utils/genzaptelconf b/xpp/utils/genzaptelconf index 4bf8a38..daccee8 100755 --- a/xpp/utils/genzaptelconf +++ b/xpp/utils/genzaptelconf @@ -87,7 +87,7 @@ tmp_dir= # A list of all modules: # - the list of modules which will be probed (in this order) if -d is used # - The module that will be deleted from /etc/modules , if -d -M is used -ALL_MODULES="vzaphfc zaphfc qozap ztgsm wctdm wctdm24xxp wcfxo wcfxs pciradio tor2 torisa wcte12xp wct1xxp wct4xxp wcte11xp wanpipe wcusb xpp_usb" +ALL_MODULES="wct4xxp wcte12xp wcte11xp wct1xxp wanpipe tor2 torisa qozap vzaphfc zaphfc ztgsm wctdm24xxp wctdm opvxa1200 wcfxo pciradio wcusb xpp_usb" # The name of the variable in /etc/sysconfig/zaptel into which to set # the list of detected modules. @@ -102,6 +102,7 @@ modules_var=MODULES #ZAPBRI_SIGNALLING=bri ZAPBRI_SIGNALLING=bri_ptmp #ZAPBRI_SIGNALLING=pri +zapconf_def_termtype=te # read default configuration from /etc/default/zaptel if [ -r $ZAPTEL_BOOT_DEBIAN ]; then . $ZAPTEL_BOOT_DEBIAN; fi @@ -915,6 +916,10 @@ EOF echo 'ami' >$tmp_dir/span_coding echo '' >$tmp_dir/span_switchtype echo '' >$tmp_dir/span_signalling + if [ "$zapconf_def_termtype" != '' ] + then + echo "$zapconf_def_termtype" >$tmp_dir/span_termtype + fi # Check if ZapBRI cards are in TE or NT mode if echo $title | egrep -q '((quad|octo)BRI PCI ISDN Card.* \[NT\]\ |octoBRI \[NT\] |HFC-S PCI A ISDN.* \[NT\] )' @@ -1101,6 +1106,16 @@ then detect fi +if [ "$zapconf_use_perl" = yes ]; then + #redefine genconf to use perl utilities: + genconf() { + case "$1" in + list) zaptel_hardware ;; + files) zapconf ;; + esac + } +fi + if [ "$mode" = list ]; then genconf list else |