diff options
Diffstat (limited to 'xpp/init_card_3_26')
| -rwxr-xr-x | xpp/init_card_3_26 | 185 |
1 files changed, 185 insertions, 0 deletions
diff --git a/xpp/init_card_3_26 b/xpp/init_card_3_26 new file mode 100755 index 0000000..3f07578 --- /dev/null +++ b/xpp/init_card_3_26 @@ -0,0 +1,185 @@ +#! /bin/sh +# +# Written by Oron Peled <oron@actcom.co.il> +# Copyright (C) 2006, Xorcom +# +# All rights reserved. +# +# This program is free software; you can redistribute it and/or modify +# it under the terms of the GNU General Public License as published by +# the Free Software Foundation; either version 2 of the License, or +# (at your option) any later version. +# +# See the file LICENSE in the top level of this tarball. +# + +# +# $Id$ +# +# Data format: +# - A comment start with ';' or '#' until the end of line +# - Blank lines are ignored +# - Fields are whitespace separated (spaces or tabs) +# +# The fields are (in command line order): +# 1. SLIC select in decimal (range 0-7). +# 31 is a special value which means ALL SLICS (only some registers +# accept settings for ALL SLICS). +# 2. Command word: +# - RD Read Direct register. +# - RI Read Indirect register. +# - WD Write Direct register. +# - WI Write Indirect register. +# 3. Register number in hexadecimal. +# 4. Low data byte in hexadecimal. (for WD and WI commands). +# 5. High data byte in hexadecimal. (for WI command only). +# +# + +# ----------------------------------==== 8-channel FXS unit initialization ===----------------------------------------- + +set -e + +me=`basename $0` +INIT_DIR=`dirname $0` +XPP_BASE=/proc/xpp +export XPP_BASE +LOGGER="logger -s -t $me" + +ZAPTEL_BOOT_DEBIAN=${ZAPTEL_BOOT_DEBIAN:-/etc/default/zaptel} +ZAPTEL_BOOT_FEDORA=${ZAPTEL_BOOT_FEDORA:-/etc/sysconfig/zaptel} + +# read default configuration from /etc/default/zaptel +if [ -r $ZAPTEL_BOOT_DEBIAN ]; then . $ZAPTEL_BOOT_DEBIAN; fi +if [ -r $ZAPTEL_BOOT_FEDORA ]; then . $ZAPTEL_BOOT_FEDORA; fi + +if [ "$DEBUG_CALIBRATION"=1 ]; then + LOGGER=":" +fi + +# Always redirect stderr somewhere, otherwise the shell script will die +# when it tries to do I/O related stuff on closed file descriptor. +# Our default is to throw it down the bit-bucket. +exec 2> /dev/console +## If you wish to trace this script: +#exec 2> /tmp/xpp_init_$XPD_NAME +## Altenativly, if you have multiple XBUS'es: +#exec 2> /tmp/xpp_init_$XBUS_NAME_$XPD_NAME +#set -x + +# redirect script output to the "slics" (registers command) file: +exec 1> "$XPP_BASE/$XPD_BUS/$XPD_NAME/slics" + +$LOGGER -p kern.info "$XPD_BUS/$XPD_NAME: Calibrating '$0'" + +"$INIT_DIR/calibrate_slics" + +$LOGGER -p kern.info "$XPD_BUS/$XPD_NAME: Continue '$0'" + +echo " +# Change SLICs states to "Open state"s (Off,all transfers tristated to avoid data collision), Voltage sense +31 WD 40 00 + +# Flush out energy accumulators +31 WI 58 00 00 +31 WI 59 00 00 +31 WI 5A 00 00 +31 WI 5B 00 00 +31 WI 5C 00 00 +31 WI 5D 00 00 +31 WI 5E 00 00 +31 WI 5F 00 00 +31 WI 61 00 00 +31 WI 58 00 00 +31 WI C1 00 00 +31 WI C2 00 00 +31 WI C3 00 00 +31 WI C4 00 00 +31 WI C5 00 00 +31 WI C6 00 00 +31 WI C7 00 00 +31 WI C8 00 00 +31 WI C9 00 00 +31 WI CA 00 00 +31 WI CB 00 00 +31 WI CC 00 00 +31 WI CD 00 00 +31 WI CE 00 00 +31 WI CF 00 00 +31 WI D0 00 00 +31 WI D1 00 00 +31 WI D2 00 00 +31 WI D3 00 00 + +# Setting of SLICs offsets +# New card initialization +0 WD 02 00 +0 WD 04 00 +1 WD 02 08 +1 WD 04 08 +2 WD 02 10 +2 WD 04 10 +3 WD 02 18 +3 WD 04 18 +4 WD 02 20 +4 WD 04 20 +5 WD 02 28 +5 WD 04 28 +6 WD 02 30 +6 WD 04 30 +7 WD 02 38 +7 WD 04 38 +31 WD 03 00 +31 WD 05 00 + +# Audio path. (also initialize 0A and 0B here if necessary) +31 WD 08 00 +31 WD 09 00 + +31 WD 17 00 + +# Automatic/Manual Control: defaults - Cancel Power Alarm +31 WD 43 1E + +# Loop Closure Debounce Interval +31 WD 45 0A + +# Ring Detect Debounce Interval +31 WD 46 0B + +# Battery Feed Control: Battery low (DCSW low) +31 WD 42 00 + +# Loop Current Limit +31 WD 47 00 + +31 WD 6C 01 + +31 WI 23 00 80 +31 WI 24 20 03 +31 WI 25 8C 08 +31 WI 26 00 01 +31 WI 27 10 00 + + +# ------------------------------------- Initialization of direct registers -------------------------------------------- + +# Mode(8-bit,u-Law,1 PCLK ) setting, Loopbacks and Interrupts clear + +31 WD 01 29 +#31 WD 0E 00 + +#31 WD 15 00 +#31 WD 16 03 + +# Clear pending interrupts +31 WD 12 FF +31 WD 13 FF +31 WD 14 FF + +#31 WD 4A 34 +#31 WD 4B 10 +" | sed -e 's/[;#].*$//' -e '/^[ ]*$/d' + +$LOGGER -p kern.info "$XPD_BUS/$XPD_NAME: Ending '$0'" +exit 0 |