| Age | Commit message (Collapse) | Author |
|---|
|
As of 2.6.26 the macros dev_name() and set_dev_name() are used to read
and set (respectively) the bus_id member in sysfs. As of 2.6.30 bus_id
is gone. This patch provides comaptiobility macros for older kernel
versions and removes direct usage of bus_id.
From dahdi-linux r6637. Regarding issue #14965 .
git-svn-id: http://svn.digium.com/svn/zaptel/branches/1.4@4649 5390a7c7-147a-4af0-8ec9-7488f05a26cb
|
|
This adds a compatibility macro for older versions that is a noop for
kernels >= 2.6.30.
From dahdi-linux r6642, r6659 , regarding issue #14964 .
git-svn-id: http://svn.digium.com/svn/zaptel/branches/1.4@4648 5390a7c7-147a-4af0-8ec9-7488f05a26cb
|
|
For finer details and separate commits, you are advised to look into the
commit log of dahdi-{linux,tools}.
xpp.r7150
* 116x Astribanks:
- Support for the TwinStar capability and for FXO and (BRI|PRI) on
same device.
- New control protocol ("MPP").
- astribank_hextool - a low-level firmware loading tool instead of
fpga_load .
- astribank_tool - Other MPP activities .
- Can still reset (but just that) through older protocol.
- astribank_hexload is required for loading FPGA firmware for USB_FW.hex
rev > 6885.
- USB_FW rev. 7071 .
- More modular FPGA firmware (1161 only).
- FPGA_1161.hex rev. 7131. PIC_TYPE_* rev. 7107.
- software-settings of some capabilities with astribank_allow .
* XPP:
- init_card_* script are less verbose.
- Reduced rate of "Is a DAHDI sync master" message.
- Replace member bus_id with dev_name() and set_dev_name() for
building with 2.6.30.
- Conditionally remove 'owner' property of procfs was dropped in 2.6.30.
- astribank_hook now enabled by default.
- Has an optional hook for TwinStar.
* BRI:
- hardhdlc support: The bri_dchan patch is no longer needed.
- If bri_dchan patch applied: old code is used, and "dchan" is used.
- If not: new code and "hardhdlc" is used.
- zapconf will generate the right configuration, depending on the new
sysfs driver attribute bri_hardhdlc, but default to "dchan" as
before if not explicitly told.
- Bugfix: explicitly turn off leds on startup.
* FXS:
- Initialization and calibration fixes.
- Notify the user just one about wrong VMWI config
* Dahdi-perl:
- Fix detection of empty slots in wctdm.
- Fix working with ethmf's extra file in /proc/zaptel
- Improved detection of Rhino cards.
- dahdi_genconf's generated text better explains files are generated.
- /etc/xpp_order - allow specifiying an explicit order for
Astribanks to register with Zaptel.
- Dahdi::Xpp::Mpp - A wrapper around astribank_tool .
* dahdi.init:
- A separate waitfor_xpds script. May now have a wait-loop in
some cases.
- xpp_sync needs to only be called after dahdi_cfg .
(for the PRI module).
git-svn-id: http://svn.digium.com/svn/zaptel/branches/1.4@4641 5390a7c7-147a-4af0-8ec9-7488f05a26cb
|
|
Sun Mar 1 2009 Oron Peled <oron@actcom.co.il> - xpp.r6795
* Fix cases where the command_queue overflowed during initialization.
- Also add a 'command_queue_length' parameter to xpp.ko
* More migrations to sysfs:
- Add a 'transport' attribute to our astribank devices which
points to the usb device we use. E.g:
/sys/bus/astribanks/devices/xbus-00/transport is symlinked to
../../../../../../devices/pci0000:00/0000:00:10.4/usb5/5-4
- Move /proc/xpp/XBUS-??/XPD-??/span to
/sys/bus/xpds/devices/??:?:?/span
- Migrate from /proc/xpp/sync to:
/sys/bus/astribanks/drivers/xppdrv/sync
- New 'offhook' attribute in:
/sys/bus/xpds/devices/??:?:?/offhook
* PRI: change the "timing" priority to match the convention used by
other PRI cards -- I.e: lower numbers (not 0) have higher
priority.
* FXO:
- Power denial: create two module parameters instead of hard-coded
constants (power_denial_safezone, power_denial_minlen).
For sites that get non-standard power-denial signals from central
office on offhook.
- Don't hangup on power-denial, just notify Dahdi and wait for
- Fix caller-id detection for the case central office sends it before
first ring without any indication before.
Asterisk's desicion.
Mon, Dec 8 2008 Oron Peled <oron@actcom.co.il> - xpp.r6430
* PRI:
- Match our span clocking priorities (in system.conf)
to Digium -- this is a reversal of the previous state.
Now lower numbers (greater than 0) are better.
- Synchronization fixes for PRI ports other than 0.
- Fix T1 CRC for some countries (e.g: China).
* FXS: fix bug in VMWI detection if using old asterisk
which does not provide ZT_VMWI ioctl().
* FXO:
- Improve caller_id_style module parameter. This provide a workaround
for countries that send this information without any notification
(reverse polarity, ring, etc.)
- Don't force on-hook upon power-denial. So, loopstart devices
would ignore these as expected.
* Implement a flow-control to prevent user space (init_card_* scripts)
from pressuring our command queue.
git-svn-id: http://svn.digium.com/svn/zaptel/branches/1.4@4631 5390a7c7-147a-4af0-8ec9-7488f05a26cb
|
|
* Power-denial signalling is now sent to Zaptel to decide if we're LS or
KS (and not hang up ourselves always).
* Fix card_fxo's caller_id_style=1 (FSK).
* Macro XPD_CHAN: s/xpd->chans[i]/XPD_CHAN(xpd, i)/ to reduce diff from DAHDI.
git-svn-id: http://svn.digium.com/svn/zaptel/branches/1.4@4590 5390a7c7-147a-4af0-8ec9-7488f05a26cb
|
|
* Also rename the CID_STYLE_* constants to formal names.
From Xorcom Rev. 6115.
Merged revisions 4519 via svnmerge from
http://svn.digium.com/svn/zaptel/branches/1.2
git-svn-id: http://svn.digium.com/svn/zaptel/branches/1.4@4529 5390a7c7-147a-4af0-8ec9-7488f05a26cb
|
|
This is only an issue with the displayed value. In case you wondered why
you have battery voltage of more than 220V.
Merged revisions 4484 via svnmerge from
http://svn.digium.com/svn/zaptel/branches/1.2
git-svn-id: http://svn.digium.com/svn/zaptel/branches/1.4@4485 5390a7c7-147a-4af0-8ec9-7488f05a26cb
|
|
Merged revisions 4468 via svnmerge from
http://svn.digium.com/svn/zaptel/branches/1.2
git-svn-id: http://svn.digium.com/svn/zaptel/branches/1.4@4472 5390a7c7-147a-4af0-8ec9-7488f05a26cb
|
|
compatibility kludge so it actually affect code (failed compilation on
zaptel-1.2 from Digium without (Closes issue #12654 ).
* Cleanup a compile warning in xpp/card_global.c .
* Fix regression in PRI init script (case of less than 4 modules).
* Update changelog and bump version.
Merged revisions 4304 via svnmerge from
http://svn.digium.com/svn/zaptel/branches/1.2
git-svn-id: http://svn.digium.com/svn/zaptel/branches/1.4@4305 5390a7c7-147a-4af0-8ec9-7488f05a26cb
|
|
* New firmware protocol version: 3.0 .
* New numbers for the device types: (e.g. in card_init* scripts)
- FXS: 1 (was: 3)
- FXO: 2 (was: 4)
- BRI: 3 (was: 6 for TE, 7 for NT)
- PRI: 4 (was: 9)
* Init scripts of FXS and FXO modules are now written in Perl as well
(be sure to have File::Basename, e.g: perl-modules in Debian).
* calibrate_slics merged into init_card_1_30 .
* Module parameter print_dbg replaced with debug . Same meaning.
* init_fxo_modes removed: content moved into init_card_2_30, verified
at build time.
* Code tested with sparse. Most warnings were fixed.
* Set ZT_SIG_DACS for the bchans in the PRI and BRI modules to not get
ignored by ztscan.
* Handle null config_desc we get from some crazy USB controllers.
* genzaptelconf: Fix reporting of empty slots in list mode.
* xpp_blink can now blink a single analog port.
* "slics" has been renamed "chipregs".
* Fixed a small typo in fpga_load(8).
* Fixed bashism in xpp_fxloader.
Merged revisions 4264 via svnmerge from
http://svn.digium.com/svn/zaptel/branches/1.2
git-svn-id: http://svn.digium.com/svn/zaptel/branches/1.4@4266 5390a7c7-147a-4af0-8ec9-7488f05a26cb
|
|
* Build:
- Zaptel >= 1.4.9 is migrating to storing kernel stuff in zaptel/kernel/*
- We conditionally use old/new directory scheme:
In xpp/Kbuild and xpp/utils/Makefile use ZAP_KERNEL variable, so it's
not confused with ZAPTEL_DIR (which appears in zaptel/Makefile as well).
- Fix compile warnings on 64 bit systems.
- Compile fixes for kernel-2.6.24
* UDEV:
- /etc/udev/rules.d/xpp.rules now uses XPP_INIT_DIR to find astribank_hook.
- astribank_hook: Modify to do nothing. Add some documentation.
* Autoconfiguration -- zapconf:
- Don't fail zapconf et.al. if no config file was found.
- Skip the 'IRQ Missing:' line in /proc/zaptel/nnn for wcte1xp(?).
- Add some newer Digium cards to our hardware inventory.
- Partially handle cases where the /proc/zaptel strings does not contain
info about E1/T1/J1 or NT/TE.
* Better SYNC:
- Finer tuning of PLL (New firmware).
- Change calculation algorithm of sync offset. It now copes better
with the variance in USB frame reception timing.
- Statistics:
. The view of results was moved from /proc/xpp/XBUS-*/summary to
a new /sys/bus/astribanks/devices/xbus-*/timing and enhanced.
. A new xpp_timing script shows all astribanks.
. A new write only /sys/bus/astribanks/devices/xbus-*/cls is
used to clear statistics. Eventually, clearing of XBUS related
statistics should be done here. One that was migrated is the
clearing of 'PCM [TR]X:' numbers currently appearing in
/proc/xpp/XBUS-*/summary (they should be moved too later).
- Shorten the strings representation sync_mode ("SYNC_MODE_AB" -> "AB")
adapted their use in printk and /proc so the text is clear.
- Added a command line parameter xpp.disable_pll_sync to stop all
adjustments command to AB (calculations still continue as usual).
* PRI:
- 4 port support
- set clocking master span via ztcfg, like other zaptel devices.
* FXO:
- Fix false hangups in some countries (voltage fluctuations).
- Some countries send caller-id before first ring.
Added code to handle caller-id PCM pass through according to
a new command line parameter (xpd_fxo.caller_id_style).
- No longer sends an event on zt_open. See #12160 .
* Misc:
- Adapt to zaptel-1.4.8 and above ztscan: added fields returend by
new ZT_SPANSTAT_V2 ioctl()
- Document sysfs and waitfor_xpds.
- Miscelaneous optimizations and bugfixes.
- Remove deprecated pcm_tasklet parameter. The rx_tasklet parameter has
replaced it a long time ago.
- Add RX_CMD counter to /proc/xpp/XBUS-*/summary
- Unclutter some of the usb disconnect messages.
- xpp_usb: minor preformance improvements in receive.
Expose the number of pending receive URB's in /proc/xpp/XBUS-*/xpp_usb
Merged revisions 3952 via svnmerge from
http://svn.digium.com/svn/zaptel/branches/1.2
git-svn-id: http://svn.digium.com/svn/zaptel/branches/1.4@3957 5390a7c7-147a-4af0-8ec9-7488f05a26cb
|
|
(merged branch /zaptel/team/tzafrir/move )
Closes issue #7117.
git-svn-id: http://svn.digium.com/svn/zaptel/branches/1.4@3793 5390a7c7-147a-4af0-8ec9-7488f05a26cb
|
