Age | Commit message (Collapse) | Author |
|
For finer details and separate commits, you are advised to look into the
commit log of dahdi-{linux,tools}.
xpp.r7150
* 116x Astribanks:
- Support for the TwinStar capability and for FXO and (BRI|PRI) on
same device.
- New control protocol ("MPP").
- astribank_hextool - a low-level firmware loading tool instead of
fpga_load .
- astribank_tool - Other MPP activities .
- Can still reset (but just that) through older protocol.
- astribank_hexload is required for loading FPGA firmware for USB_FW.hex
rev > 6885.
- USB_FW rev. 7071 .
- More modular FPGA firmware (1161 only).
- FPGA_1161.hex rev. 7131. PIC_TYPE_* rev. 7107.
- software-settings of some capabilities with astribank_allow .
* XPP:
- init_card_* script are less verbose.
- Reduced rate of "Is a DAHDI sync master" message.
- Replace member bus_id with dev_name() and set_dev_name() for
building with 2.6.30.
- Conditionally remove 'owner' property of procfs was dropped in 2.6.30.
- astribank_hook now enabled by default.
- Has an optional hook for TwinStar.
* BRI:
- hardhdlc support: The bri_dchan patch is no longer needed.
- If bri_dchan patch applied: old code is used, and "dchan" is used.
- If not: new code and "hardhdlc" is used.
- zapconf will generate the right configuration, depending on the new
sysfs driver attribute bri_hardhdlc, but default to "dchan" as
before if not explicitly told.
- Bugfix: explicitly turn off leds on startup.
* FXS:
- Initialization and calibration fixes.
- Notify the user just one about wrong VMWI config
* Dahdi-perl:
- Fix detection of empty slots in wctdm.
- Fix working with ethmf's extra file in /proc/zaptel
- Improved detection of Rhino cards.
- dahdi_genconf's generated text better explains files are generated.
- /etc/xpp_order - allow specifiying an explicit order for
Astribanks to register with Zaptel.
- Dahdi::Xpp::Mpp - A wrapper around astribank_tool .
* dahdi.init:
- A separate waitfor_xpds script. May now have a wait-loop in
some cases.
- xpp_sync needs to only be called after dahdi_cfg .
(for the PRI module).
git-svn-id: http://svn.digium.com/svn/zaptel/branches/1.4@4641 5390a7c7-147a-4af0-8ec9-7488f05a26cb
|
|
* Build:
- Zaptel >= 1.4.9 is migrating to storing kernel stuff in zaptel/kernel/*
- We conditionally use old/new directory scheme:
In xpp/Kbuild and xpp/utils/Makefile use ZAP_KERNEL variable, so it's
not confused with ZAPTEL_DIR (which appears in zaptel/Makefile as well).
- Fix compile warnings on 64 bit systems.
- Compile fixes for kernel-2.6.24
* UDEV:
- /etc/udev/rules.d/xpp.rules now uses XPP_INIT_DIR to find astribank_hook.
- astribank_hook: Modify to do nothing. Add some documentation.
* Autoconfiguration -- zapconf:
- Don't fail zapconf et.al. if no config file was found.
- Skip the 'IRQ Missing:' line in /proc/zaptel/nnn for wcte1xp(?).
- Add some newer Digium cards to our hardware inventory.
- Partially handle cases where the /proc/zaptel strings does not contain
info about E1/T1/J1 or NT/TE.
* Better SYNC:
- Finer tuning of PLL (New firmware).
- Change calculation algorithm of sync offset. It now copes better
with the variance in USB frame reception timing.
- Statistics:
. The view of results was moved from /proc/xpp/XBUS-*/summary to
a new /sys/bus/astribanks/devices/xbus-*/timing and enhanced.
. A new xpp_timing script shows all astribanks.
. A new write only /sys/bus/astribanks/devices/xbus-*/cls is
used to clear statistics. Eventually, clearing of XBUS related
statistics should be done here. One that was migrated is the
clearing of 'PCM [TR]X:' numbers currently appearing in
/proc/xpp/XBUS-*/summary (they should be moved too later).
- Shorten the strings representation sync_mode ("SYNC_MODE_AB" -> "AB")
adapted their use in printk and /proc so the text is clear.
- Added a command line parameter xpp.disable_pll_sync to stop all
adjustments command to AB (calculations still continue as usual).
* PRI:
- 4 port support
- set clocking master span via ztcfg, like other zaptel devices.
* FXO:
- Fix false hangups in some countries (voltage fluctuations).
- Some countries send caller-id before first ring.
Added code to handle caller-id PCM pass through according to
a new command line parameter (xpd_fxo.caller_id_style).
- No longer sends an event on zt_open. See #12160 .
* Misc:
- Adapt to zaptel-1.4.8 and above ztscan: added fields returend by
new ZT_SPANSTAT_V2 ioctl()
- Document sysfs and waitfor_xpds.
- Miscelaneous optimizations and bugfixes.
- Remove deprecated pcm_tasklet parameter. The rx_tasklet parameter has
replaced it a long time ago.
- Add RX_CMD counter to /proc/xpp/XBUS-*/summary
- Unclutter some of the usb disconnect messages.
- xpp_usb: minor preformance improvements in receive.
Expose the number of pending receive URB's in /proc/xpp/XBUS-*/xpp_usb
Merged revisions 3952 via svnmerge from
http://svn.digium.com/svn/zaptel/branches/1.2
git-svn-id: http://svn.digium.com/svn/zaptel/branches/1.4@3957 5390a7c7-147a-4af0-8ec9-7488f05a26cb
|
|
(merged branch /zaptel/team/tzafrir/move )
Closes issue #7117.
git-svn-id: http://svn.digium.com/svn/zaptel/branches/1.4@3793 5390a7c7-147a-4af0-8ec9-7488f05a26cb
|