summaryrefslogtreecommitdiff
path: root/kernel/xpp/utils
AgeCommit message (Collapse)Author
2009-06-12astribank_tool: Support 'reset' of old protocol as fallbacktzafrir
If astribank_tool fails to open a device when running a reset command, try to reset the device with the command from the old (pre-MPP) protocol (A single 0x20 byte). No support whatsoever for any other feature of the old protocol. This was accidentally left out of previous commits. git-svn-id: http://svn.digium.com/svn/zaptel/branches/1.4@4653 5390a7c7-147a-4af0-8ec9-7488f05a26cb
2009-06-04Fix documentation of parameter brint_overlaptzafrir
(Documentation-only change) git-svn-id: http://svn.digium.com/svn/zaptel/branches/1.4@4651 5390a7c7-147a-4af0-8ec9-7488f05a26cb
2009-05-27* Actually install astribank_allowtzafrir
* Which requires a man page * And ignore some extra generated files while we're at it. git-svn-id: http://svn.digium.com/svn/zaptel/branches/1.4@4643 5390a7c7-147a-4af0-8ec9-7488f05a26cb
2009-05-27Big dump of newer xpp code.tzafrir
For finer details and separate commits, you are advised to look into the commit log of dahdi-{linux,tools}. xpp.r7150 * 116x Astribanks: - Support for the TwinStar capability and for FXO and (BRI|PRI) on same device. - New control protocol ("MPP"). - astribank_hextool - a low-level firmware loading tool instead of fpga_load . - astribank_tool - Other MPP activities . - Can still reset (but just that) through older protocol. - astribank_hexload is required for loading FPGA firmware for USB_FW.hex rev > 6885. - USB_FW rev. 7071 . - More modular FPGA firmware (1161 only). - FPGA_1161.hex rev. 7131. PIC_TYPE_* rev. 7107. - software-settings of some capabilities with astribank_allow . * XPP: - init_card_* script are less verbose. - Reduced rate of "Is a DAHDI sync master" message. - Replace member bus_id with dev_name() and set_dev_name() for building with 2.6.30. - Conditionally remove 'owner' property of procfs was dropped in 2.6.30. - astribank_hook now enabled by default. - Has an optional hook for TwinStar. * BRI: - hardhdlc support: The bri_dchan patch is no longer needed. - If bri_dchan patch applied: old code is used, and "dchan" is used. - If not: new code and "hardhdlc" is used. - zapconf will generate the right configuration, depending on the new sysfs driver attribute bri_hardhdlc, but default to "dchan" as before if not explicitly told. - Bugfix: explicitly turn off leds on startup. * FXS: - Initialization and calibration fixes. - Notify the user just one about wrong VMWI config * Dahdi-perl: - Fix detection of empty slots in wctdm. - Fix working with ethmf's extra file in /proc/zaptel - Improved detection of Rhino cards. - dahdi_genconf's generated text better explains files are generated. - /etc/xpp_order - allow specifiying an explicit order for Astribanks to register with Zaptel. - Dahdi::Xpp::Mpp - A wrapper around astribank_tool . * dahdi.init: - A separate waitfor_xpds script. May now have a wait-loop in some cases. - xpp_sync needs to only be called after dahdi_cfg . (for the PRI module). git-svn-id: http://svn.digium.com/svn/zaptel/branches/1.4@4641 5390a7c7-147a-4af0-8ec9-7488f05a26cb
2009-03-29zapconf: Set contexts same as groupstzafrir
git-svn-id: http://svn.digium.com/svn/zaptel/branches/1.4@4635 5390a7c7-147a-4af0-8ec9-7488f05a26cb
2009-03-19xpp: a massive backport from DAHDI. From Xorcom branch-rel-6839-r6908 .tzafrir
Sun Mar 1 2009 Oron Peled <oron@actcom.co.il> - xpp.r6795 * Fix cases where the command_queue overflowed during initialization. - Also add a 'command_queue_length' parameter to xpp.ko * More migrations to sysfs: - Add a 'transport' attribute to our astribank devices which points to the usb device we use. E.g: /sys/bus/astribanks/devices/xbus-00/transport is symlinked to ../../../../../../devices/pci0000:00/0000:00:10.4/usb5/5-4 - Move /proc/xpp/XBUS-??/XPD-??/span to /sys/bus/xpds/devices/??:?:?/span - Migrate from /proc/xpp/sync to: /sys/bus/astribanks/drivers/xppdrv/sync - New 'offhook' attribute in: /sys/bus/xpds/devices/??:?:?/offhook * PRI: change the "timing" priority to match the convention used by other PRI cards -- I.e: lower numbers (not 0) have higher priority. * FXO: - Power denial: create two module parameters instead of hard-coded constants (power_denial_safezone, power_denial_minlen). For sites that get non-standard power-denial signals from central office on offhook. - Don't hangup on power-denial, just notify Dahdi and wait for - Fix caller-id detection for the case central office sends it before first ring without any indication before. Asterisk's desicion. Mon, Dec 8 2008 Oron Peled <oron@actcom.co.il> - xpp.r6430 * PRI: - Match our span clocking priorities (in system.conf) to Digium -- this is a reversal of the previous state. Now lower numbers (greater than 0) are better. - Synchronization fixes for PRI ports other than 0. - Fix T1 CRC for some countries (e.g: China). * FXS: fix bug in VMWI detection if using old asterisk which does not provide ZT_VMWI ioctl(). * FXO: - Improve caller_id_style module parameter. This provide a workaround for countries that send this information without any notification (reverse polarity, ring, etc.) - Don't force on-hook upon power-denial. So, loopstart devices would ignore these as expected. * Implement a flow-control to prevent user space (init_card_* scripts) from pressuring our command queue. git-svn-id: http://svn.digium.com/svn/zaptel/branches/1.4@4631 5390a7c7-147a-4af0-8ec9-7488f05a26cb
2009-01-28xpp_sync: Fix an NT/TE mixup (in automatic syncers order)tzafrir
The respective code in DAHDI has already been fixed by rewriting. git-svn-id: http://svn.digium.com/svn/zaptel/branches/1.4@4620 5390a7c7-147a-4af0-8ec9-7488f05a26cb
2008-10-20zapconf: Fix number in error message in case of unknown channel type.tzafrir
git-svn-id: http://svn.digium.com/svn/zaptel/branches/1.4@4571 5390a7c7-147a-4af0-8ec9-7488f05a26cb
2008-09-09Zaptel.pm: Fix sample program (perldoc-only fix).tzafrir
Merged revisions 4533 via svnmerge from http://svn.digium.com/svn/zaptel/branches/1.2 git-svn-id: http://svn.digium.com/svn/zaptel/branches/1.4@4534 5390a7c7-147a-4af0-8ec9-7488f05a26cb
2008-09-09Fix another path to an uninitialized SUB config provided to us from thetzafrir
controller. From xpp rev. 6071. Merged revisions 4516 via svnmerge from http://svn.digium.com/svn/zaptel/branches/1.2 git-svn-id: http://svn.digium.com/svn/zaptel/branches/1.4@4523 5390a7c7-147a-4af0-8ec9-7488f05a26cb
2008-09-08Minor FXS/FXO type fixes in case probe was not done.tzafrir
Merged revisions 4512 via svnmerge from http://svn.digium.com/svn/zaptel/branches/1.2 git-svn-id: http://svn.digium.com/svn/zaptel/branches/1.4@4514 5390a7c7-147a-4af0-8ec9-7488f05a26cb
2008-08-20Mark xpp_fxloader as executable.tzafrir
git-svn-id: http://svn.digium.com/svn/zaptel/branches/1.4@4494 5390a7c7-147a-4af0-8ec9-7488f05a26cb
2008-08-17Zaptel-perl: fix leftovers from r4475 (handling of spaces)tzafrir
While r4476 solved some parsing problems of channels with "strange" encoding names, it introduced a new problem (e.g.: "RED" after "(In use)" which is fixed here. Merged revisions 4488 via svnmerge from http://svn.digium.com/svn/zaptel/branches/1.2 git-svn-id: http://svn.digium.com/svn/zaptel/branches/1.4@4489 5390a7c7-147a-4af0-8ec9-7488f05a26cb
2008-08-12bring back the transcoder interface... it will be upgraded to the new ↵kpfleming
improved version here too git-svn-id: http://svn.digium.com/svn/zaptel/branches/1.4@4477 5390a7c7-147a-4af0-8ec9-7488f05a26cb
2008-08-12Zaptel-perl: more robust parsing of channel signalling types.tzafrir
Parse them from a list rather thna fusing a regex of a "word". Merged revisions 4475 via svnmerge from http://svn.digium.com/svn/zaptel/branches/1.2 git-svn-id: http://svn.digium.com/svn/zaptel/branches/1.4@4476 5390a7c7-147a-4af0-8ec9-7488f05a26cb
2008-08-07remove support for the Digium TC400 transcoder card; the interace to this ↵kpfleming
card has been completely redesigned, and the new interface will only be present in DAHDI; TC400 users will need to upgrade to DAHDI 2.0.0 to continue using their transcoder cards git-svn-id: http://svn.digium.com/svn/zaptel/branches/1.4@4469 5390a7c7-147a-4af0-8ec9-7488f05a26cb
2008-08-04Remove obsolete calibrate_slics. Clean more in utils Makefile.tzafrir
Merged revisions 4458 via svnmerge from http://svn.digium.com/svn/zaptel/branches/1.2 git-svn-id: http://svn.digium.com/svn/zaptel/branches/1.4@4459 5390a7c7-147a-4af0-8ec9-7488f05a26cb
2008-08-04Merged revisions 4451-4455 via svnmerge from tzafrir
http://svn.digium.com/svn/zaptel/branches/1.2 ........ r4451 | tzafrir | 2008-08-04 18:11:01 +0300 (Mon, 04 Aug 2008) | 9 lines Firmware update: 5959 (DTMF and BRI ID) (From DAHDI rev. 4695) * Fix some cases of double digits. * Fix some rare cases of a BRI unit providing incorrect directionality. * Extra debugging code in card_fxs.c to trace future DTMF issues. * Properly note DAHDI (as opposed to Zaptel) ioctls. ........ r4452 | tzafrir | 2008-08-04 18:36:19 +0300 (Mon, 04 Aug 2008) | 2 lines Make it formally bashism. ........ r4453 | tzafrir | 2008-08-04 18:38:10 +0300 (Mon, 04 Aug 2008) | 2 lines Kbuild: A more robust check for the bri_dchan patch. ........ r4454 | tzafrir | 2008-08-04 18:39:01 +0300 (Mon, 04 Aug 2008) | 2 lines Minor BRI initlization improvements. ........ r4455 | tzafrir | 2008-08-04 18:43:32 +0300 (Mon, 04 Aug 2008) | 7 lines Add channel alarms in Zaptel-perl and lszaptel specifically. * Zaptel::Chans now provides a method alarms() for a list (or number of) alarms. * lszaptel uses it for a more correct display of channel status. * Also update PCI hardware list. ........ git-svn-id: http://svn.digium.com/svn/zaptel/branches/1.4@4456 5390a7c7-147a-4af0-8ec9-7488f05a26cb
2008-05-20* Document Zaptel::Spantzafrir
* Minor changes to Zaptel::Xpp as well. (Documentation-only changes. xpp r5746,r5747) Merged revisions 4308 via svnmerge from http://svn.digium.com/svn/zaptel/branches/1.2 git-svn-id: http://svn.digium.com/svn/zaptel/branches/1.4@4309 5390a7c7-147a-4af0-8ec9-7488f05a26cb
2008-05-14XPP documentation fixes.tzafrir
Merged revisions 4271 via svnmerge from http://svn.digium.com/svn/zaptel/branches/1.2 git-svn-id: http://svn.digium.com/svn/zaptel/branches/1.4@4272 5390a7c7-147a-4af0-8ec9-7488f05a26cb
2008-05-13xpp r5723: Includes, among others:tzafrir
* New firmware protocol version: 3.0 . * New numbers for the device types: (e.g. in card_init* scripts) - FXS: 1 (was: 3) - FXO: 2 (was: 4) - BRI: 3 (was: 6 for TE, 7 for NT) - PRI: 4 (was: 9) * Init scripts of FXS and FXO modules are now written in Perl as well (be sure to have File::Basename, e.g: perl-modules in Debian). * calibrate_slics merged into init_card_1_30 . * Module parameter print_dbg replaced with debug . Same meaning. * init_fxo_modes removed: content moved into init_card_2_30, verified at build time. * Code tested with sparse. Most warnings were fixed. * Set ZT_SIG_DACS for the bchans in the PRI and BRI modules to not get ignored by ztscan. * Handle null config_desc we get from some crazy USB controllers. * genzaptelconf: Fix reporting of empty slots in list mode. * xpp_blink can now blink a single analog port. * "slics" has been renamed "chipregs". * Fixed a small typo in fpga_load(8). * Fixed bashism in xpp_fxloader. Merged revisions 4264 via svnmerge from http://svn.digium.com/svn/zaptel/branches/1.2 git-svn-id: http://svn.digium.com/svn/zaptel/branches/1.4@4266 5390a7c7-147a-4af0-8ec9-7488f05a26cb
2008-04-21Zaptel::Config::Default - don't die if no config file.tzafrir
(Accidentally left out of the merge from 1.2) git-svn-id: http://svn.digium.com/svn/zaptel/branches/1.4@4187 5390a7c7-147a-4af0-8ec9-7488f05a26cb
2008-04-04Zaptel::Hardware - Add support for AEX410.tzafrir
Merged revisions 4138 via svnmerge from http://svn.digium.com/svn/zaptel/branches/1.2 git-svn-id: http://svn.digium.com/svn/zaptel/branches/1.4@4139 5390a7c7-147a-4af0-8ec9-7488f05a26cb
2008-03-27No need to make the wctdm_fxomodes.h file anymore, since it would be the samesruffell
as the fxo_modes.h file. git-svn-id: http://svn.digium.com/svn/zaptel/branches/1.4@4101 5390a7c7-147a-4af0-8ec9-7488f05a26cb
2008-03-27The location of the fxo_modes structure changed.sruffell
git-svn-id: http://svn.digium.com/svn/zaptel/branches/1.4@4100 5390a7c7-147a-4af0-8ec9-7488f05a26cb
2008-03-21* Earleier initialization of PRI module's register.tzafrir
* Fix zaptel-perl reporting of battery after procfs changes. * Documentation updates. * Block hdlcstress/test fixes that followed: already merged. Merged revisions 4036 via svnmerge from http://svn.digium.com/svn/zaptel/branches/1.2 git-svn-id: http://svn.digium.com/svn/zaptel/branches/1.4@4039 5390a7c7-147a-4af0-8ec9-7488f05a26cb
2008-03-07xpp.r5512:tzafrir
* Build: - Zaptel >= 1.4.9 is migrating to storing kernel stuff in zaptel/kernel/* - We conditionally use old/new directory scheme: In xpp/Kbuild and xpp/utils/Makefile use ZAP_KERNEL variable, so it's not confused with ZAPTEL_DIR (which appears in zaptel/Makefile as well). - Fix compile warnings on 64 bit systems. - Compile fixes for kernel-2.6.24 * UDEV: - /etc/udev/rules.d/xpp.rules now uses XPP_INIT_DIR to find astribank_hook. - astribank_hook: Modify to do nothing. Add some documentation. * Autoconfiguration -- zapconf: - Don't fail zapconf et.al. if no config file was found. - Skip the 'IRQ Missing:' line in /proc/zaptel/nnn for wcte1xp(?). - Add some newer Digium cards to our hardware inventory. - Partially handle cases where the /proc/zaptel strings does not contain info about E1/T1/J1 or NT/TE. * Better SYNC: - Finer tuning of PLL (New firmware). - Change calculation algorithm of sync offset. It now copes better with the variance in USB frame reception timing. - Statistics: . The view of results was moved from /proc/xpp/XBUS-*/summary to a new /sys/bus/astribanks/devices/xbus-*/timing and enhanced. . A new xpp_timing script shows all astribanks. . A new write only /sys/bus/astribanks/devices/xbus-*/cls is used to clear statistics. Eventually, clearing of XBUS related statistics should be done here. One that was migrated is the clearing of 'PCM [TR]X:' numbers currently appearing in /proc/xpp/XBUS-*/summary (they should be moved too later). - Shorten the strings representation sync_mode ("SYNC_MODE_AB" -> "AB") adapted their use in printk and /proc so the text is clear. - Added a command line parameter xpp.disable_pll_sync to stop all adjustments command to AB (calculations still continue as usual). * PRI: - 4 port support - set clocking master span via ztcfg, like other zaptel devices. * FXO: - Fix false hangups in some countries (voltage fluctuations). - Some countries send caller-id before first ring. Added code to handle caller-id PCM pass through according to a new command line parameter (xpd_fxo.caller_id_style). - No longer sends an event on zt_open. See #12160 . * Misc: - Adapt to zaptel-1.4.8 and above ztscan: added fields returend by new ZT_SPANSTAT_V2 ioctl() - Document sysfs and waitfor_xpds. - Miscelaneous optimizations and bugfixes. - Remove deprecated pcm_tasklet parameter. The rx_tasklet parameter has replaced it a long time ago. - Add RX_CMD counter to /proc/xpp/XBUS-*/summary - Unclutter some of the usb disconnect messages. - xpp_usb: minor preformance improvements in receive. Expose the number of pending receive URB's in /proc/xpp/XBUS-*/xpp_usb Merged revisions 3952 via svnmerge from http://svn.digium.com/svn/zaptel/branches/1.2 git-svn-id: http://svn.digium.com/svn/zaptel/branches/1.4@3957 5390a7c7-147a-4af0-8ec9-7488f05a26cb
2008-03-05Hopefully a fix for issue #12150 .tzafrir
git-svn-id: http://svn.digium.com/svn/zaptel/branches/1.4@3939 5390a7c7-147a-4af0-8ec9-7488f05a26cb
2008-02-04Move kernel stuff to under kernel/ tzafrir
(merged branch /zaptel/team/tzafrir/move ) Closes issue #7117. git-svn-id: http://svn.digium.com/svn/zaptel/branches/1.4@3793 5390a7c7-147a-4af0-8ec9-7488f05a26cb
generated by cgit v1.2.3 (git 2.39.1) at 2024-06-03 04:18:56 +0000