Age | Commit message (Collapse) | Author |
|
Merging 1.2 changes of genzaptelconf:
* -l (list) now works reliebly.
* Cleared some leftover writes to standard output.
* Fixed xpp spans sort order.
git-svn-id: http://svn.digium.com/svn/zaptel/trunk@2069 5390a7c7-147a-4af0-8ec9-7488f05a26cb
|
|
Sync to xpp RELEASE-1.2.0 2933.
r2847@boole: diego | 2006-12-03 10:33:00 +0200
added documentation which explains which packages are needed to build
the drivers on different distributions.
r2862@boole: tzafrir | 2006-12-05 08:43:50 +0200
README.Astribank: A typo in the sample config (changeset:2861).
r2891@boole: tzafrir | 2006-12-08 01:11:45 +0200
Re-accept changeset:2832 after all.
r2892@boole: tzafrir | 2006-12-08 02:46:07 +0200
Merge genzaptelconf changeset:2866 from trunk:
* Zapata comment on unidentified channel goes to $zapata_file
* Correct pattern for Sangoma A200 card's channels.
r2893@boole: tzafrir | 2006-12-08 03:11:37 +0200
genzaptelconf:
* Add options xpp_fxo_rxgain: add a custom rxgain for every XPP FXO channel.
* Do print the original line for every channel.
r2909@boole: tzafrir | 2006-12-10 20:03:59 +0200
Add some sleeps in older kernels in the firmware loading script.
r2932@boole: tzafrir | 2006-12-14 17:30:12 +0200
Make the warning about a call to off-hook FXO debug. At least if we
cannot suppress it at module load time.
r2933@boole: tzafrir | 2006-12-14 17:32:00 +0200
Don't redefine 'bool' on newer kerenls to fix building with kernel
2.6.19. Taken from Digium tree.
(from changeset:2930)
git-svn-id: http://svn.digium.com/svn/zaptel/trunk@1720 5390a7c7-147a-4af0-8ec9-7488f05a26cb
|
|
r2831@boole: tzafrir | 2006-11-29 11:05:08 +0200
genzaptelconf: A list of countries for which to use busydetect.
(and get genzaptelconf here back in sync)
git-svn-id: http://svn.digium.com/svn/zaptel/trunk@1681 5390a7c7-147a-4af0-8ec9-7488f05a26cb
|
|
* Removing -DSOFT_RING: unused, useless code.
* Register init scripts are not as noisy by default.
* Register init scripts read configuration from a standard location.
* Fixed a FXO spinlock race.
(Log was lost on previos merge)
git-svn-id: http://svn.digium.com/svn/zaptel/trunk@1680 5390a7c7-147a-4af0-8ec9-7488f05a26cb
|
|
we set (except signalling). Isn't zapata.conf fun to work with?
* Allow different signalling type for ZapBRI through ZAPBRI_SIGNALLING.
- Note that even "pri" ZAPBRI_SIGNALLING requires bristuffed zaptel.
* All in all a good reason to increase version number.
git-svn-id: http://svn.digium.com/svn/zaptel/trunk@1640 5390a7c7-147a-4af0-8ec9-7488f05a26cb
|
|
git-svn-id: http://svn.digium.com/svn/zaptel/trunk@1624 5390a7c7-147a-4af0-8ec9-7488f05a26cb
|
|
Fixed a typo in the "wctdm reimplementation".
git-svn-id: http://svn.digium.com/svn/zaptel/trunk@1572 5390a7c7-147a-4af0-8ec9-7488f05a26cb
|
|
Merging xpp driver release 1.2 (rev. 2569), originally team/tzafrir/xpp_1.2
* Should build well. Almost final.
* genzaptelconf: Also work when zap_autoreg=0
* README.Astribank updated for rev. 1.2.
* xpp/utils/Makefile: Use $< with cc -c
* Get xpp/utils configuration from autoconf (without changesin top dir)
git-svn-id: http://svn.digium.com/svn/zaptel/trunk@1563 5390a7c7-147a-4af0-8ec9-7488f05a26cb
|
|
instead of setting HOSTCC and CC directly in the Makefile, use the information
provided by the configure script (issue #8055, tzafrir)
git-svn-id: http://svn.digium.com/svn/zaptel/trunk@1562 5390a7c7-147a-4af0-8ec9-7488f05a26cb
|
|
git-svn-id: http://svn.digium.com/svn/zaptel/trunk@1561 5390a7c7-147a-4af0-8ec9-7488f05a26cb
|
|
https://origsvn.digium.com/svn/zaptel/branches/1.4
........
r1547 | russell | 2006-11-01 14:04:02 -0500 (Wed, 01 Nov 2006) | 3 lines
instead of setting HOSTCC and CC directly in the Makefile, use the information
provided by the configure script (issue #8055, tzafrir)
........
git-svn-id: http://svn.digium.com/svn/zaptel/trunk@1548 5390a7c7-147a-4af0-8ec9-7488f05a26cb
|
|
git-svn-id: http://svn.digium.com/svn/zaptel/trunk@1455 5390a7c7-147a-4af0-8ec9-7488f05a26cb
|
|
git-svn-id: http://svn.digium.com/svn/zaptel/trunk@1424 5390a7c7-147a-4af0-8ec9-7488f05a26cb
|
|
git-svn-id: http://svn.digium.com/svn/zaptel/trunk@1420 5390a7c7-147a-4af0-8ec9-7488f05a26cb
|
|
git-svn-id: http://svn.digium.com/svn/zaptel/trunk@1419 5390a7c7-147a-4af0-8ec9-7488f05a26cb
|
|
* fpga_load -vvv now dumps the transmitted packet.
git-svn-id: http://svn.digium.com/svn/zaptel/trunk@1418 5390a7c7-147a-4af0-8ec9-7488f05a26cb
|
|
* Replace the completion variable with two atomic counters and a wait queue
the xbus_poll() code is revamped to use this.
* genzaptelconf: Adapt to different module parameter location in sysfs .
git-svn-id: http://svn.digium.com/svn/zaptel/trunk@1416 5390a7c7-147a-4af0-8ec9-7488f05a26cb
|
|
environment.
git-svn-id: http://svn.digium.com/svn/zaptel/trunk@1412 5390a7c7-147a-4af0-8ec9-7488f05a26cb
|
|
* genzaptelconf: really add the option -R (suppress restarting Asterisk
in the end)
git-svn-id: http://svn.digium.com/svn/zaptel/trunk@1405 5390a7c7-147a-4af0-8ec9-7488f05a26cb
|
|
* xpp/utils: Build and install init_fxo_modes . Data is based on data from
wctdm.c . TODO: a separate daa.h?
* Fail the script if automatic calibration has failed.
git-svn-id: http://svn.digium.com/svn/zaptel/trunk@1394 5390a7c7-147a-4af0-8ec9-7488f05a26cb
|
|
git-svn-id: http://svn.digium.com/svn/zaptel/trunk@1386 5390a7c7-147a-4af0-8ec9-7488f05a26cb
|
|
* bumped up internal version to 0.5.5 .
git-svn-id: http://svn.digium.com/svn/zaptel/trunk@1385 5390a7c7-147a-4af0-8ec9-7488f05a26cb
|
|
(FIXME: code copied from zaptel.init)
git-svn-id: http://svn.digium.com/svn/zaptel/trunk@1384 5390a7c7-147a-4af0-8ec9-7488f05a26cb
|
|
git-svn-id: http://svn.digium.com/svn/zaptel/trunk@1380 5390a7c7-147a-4af0-8ec9-7488f05a26cb
|
|
* Try looking for ztcfg in /usr/sbin as well.
* Also allow setting the location of ztcfg from environment.
git-svn-id: http://svn.digium.com/svn/zaptel/trunk@1294 5390a7c7-147a-4af0-8ec9-7488f05a26cb
|
|
* Work around stupid call to ztcfg on modprobe (as inserted by zaptel
install script)
* -M now edits /etc/sysconfig/zaptel if it find that file and not /etc/modules
* editing of /etc/sysconfig/zaptel: remove all lines that begin with
MODULES=, and add MODULES="list of modules" to the end.
git-svn-id: http://svn.digium.com/svn/zaptel/trunk@1293 5390a7c7-147a-4af0-8ec9-7488f05a26cb
|
|
* Config file location can be overriden by environment.
* Removed an obsolete function.
git-svn-id: http://svn.digium.com/svn/zaptel/trunk@1290 5390a7c7-147a-4af0-8ec9-7488f05a26cb
|
|
git-svn-id: http://svn.digium.com/svn/zaptel/trunk@1283 5390a7c7-147a-4af0-8ec9-7488f05a26cb
|
|
* xpp_fxloader: also add 'load' as an alias of 'xppdetect'
* xpp_fxloader: and add a 'help' message.
git-svn-id: http://svn.digium.com/svn/zaptel/trunk@1281 5390a7c7-147a-4af0-8ec9-7488f05a26cb
|
|
git-svn-id: http://svn.digium.com/svn/zaptel/trunk@1278 5390a7c7-147a-4af0-8ec9-7488f05a26cb
|
|
git-svn-id: http://svn.digium.com/svn/zaptel/trunk@1224 5390a7c7-147a-4af0-8ec9-7488f05a26cb
|
|
* genzaptelconf: A simpler wait_for_xpp using new proc wait_for_xpds
* genzaptelconf: fixed confusion between framing and coding for E1/{il/nl}
git-svn-id: http://svn.digium.com/svn/zaptel/trunk@1215 5390a7c7-147a-4af0-8ec9-7488f05a26cb
|
|
* xpd_fxo.ko (FXO span) is now operational
* Remove obsolete .inc initialization files (we use user-space init)
* Added an install target to the utils dir.
* Updated README.Astribank accordingly.
* Using RBS signalling, as caller ID did not work well otherwise.
* Better handling of USB protocol errors.
* Fixed some procfs-related races.
* per-card-module ioctls.
* fxotune support.
* opermode support (set through /etc/default/zaptel for now)
* Userspace initialization script can also read registers.
* Power calibration works (and implemented in perl)
* some fine-tuning to the regster initialization parameters.
* Leds turn on before registration and turn off after it.
git-svn-id: http://svn.digium.com/svn/zaptel/trunk@1204 5390a7c7-147a-4af0-8ec9-7488f05a26cb
|
|
* card_fxo.c: Fixed an unreleased spinlock
* utils/Makefile: No more C++ flags
* utils/Makefile: An install target
* fpga_load: usb1 support
* genzaptelconf: Support for more cards (Any Sangoma A20x testers?)
* xpp_fxloder: The new USB ID, even for manual loads...
* xpp_zap.c: Print module fetures in a better format at load time.
git-svn-id: http://svn.digium.com/svn/zaptel/trunk@1114 5390a7c7-147a-4af0-8ec9-7488f05a26cb
|
|
git-svn-id: http://svn.digium.com/svn/zaptel/trunk@1113 5390a7c7-147a-4af0-8ec9-7488f05a26cb
|
|
* fixed locking of xpd-lock
* slightly newer FPGA firmware: slight improvements.
git-svn-id: http://svn.digium.com/svn/zaptel/trunk@1078 5390a7c7-147a-4af0-8ec9-7488f05a26cb
|
|
* Please avoid setting the keyword Id on the firmware files (*.hex)
to preserve the original versioning comment.
git-svn-id: http://svn.digium.com/svn/zaptel/trunk@1023 5390a7c7-147a-4af0-8ec9-7488f05a26cb
|
|
* FPGA firmware now loaded from PC (for newer models)
* Driver for the FXO module
* Moved most userspace files to the subdirectory utils (see also next commit)
* Explicit license for firmware files
* Optionally avoid auto-registration
* Initializations parameters to chips given from userspace
* And did I mention bugfixes?
git-svn-id: http://svn.digium.com/svn/zaptel/trunk@1021 5390a7c7-147a-4af0-8ec9-7488f05a26cb
|