Age | Commit message (Collapse) | Author |
|
Merged revisions 2919 via svnmerge from
http://svn.digium.com/svn/zaptel/branches/1.2
Merged revisions 2920 via svnmerge from
http://svn.digium.com/svn/zaptel/branches/1.4
git-svn-id: http://svn.digium.com/svn/zaptel/trunk@2921 5390a7c7-147a-4af0-8ec9-7488f05a26cb
|
|
strict. (xpp r4519)
Merged revisions 2906 via svnmerge from
https://origsvn.digium.com/svn/zaptel/branches/1.2
Merged revisions 2907 via svnmerge from
https://origsvn.digium.com/svn/zaptel/branches/1.4
git-svn-id: http://svn.digium.com/svn/zaptel/trunk@2908 5390a7c7-147a-4af0-8ec9-7488f05a26cb
|
|
* BRI improvement: an 'nt_keepalive' parameter to xpd_bri forces
a BRI_NT to retry a connection indefinitely (this is our default).
When false it revert to the behaviour in changeset:4415 ("Bezeq like")
* Improvement in DBG macros. The print_dbg parameter is now set of
flags to debug. They are defined in zap_debug.h
* Don't use Astribanks connected to USB1 interfaces
Unless the user set the option usb1=1 for xpp_usb (r4504).
* And some more documentation...
* Include some of our variables in the default zaptel sample file.
Merged revisions 2860 via svnmerge from
https://origsvn.digium.com/svn/zaptel/branches/1.2
Merged revisions 2866 via svnmerge from
https://origsvn.digium.com/svn/zaptel/branches/1.4
git-svn-id: http://svn.digium.com/svn/zaptel/trunk@2867 5390a7c7-147a-4af0-8ec9-7488f05a26cb
|
|
* Marked with no. 4416, to note that major changes after 4415 were
note merged yet.
* Demote the messages about PCM in non-PCM from notice to debug (r4501).
* Fix sample BRI zapata.conf: NT instead of TE (r4498).
* Disable FXS hardware DTMF detection by default (r4492).
Merged revisions 2832 via svnmerge from
https://origsvn.digium.com/svn/zaptel/branches/1.2
Merged revisions 2833 via svnmerge from
https://origsvn.digium.com/svn/zaptel/branches/1.4
git-svn-id: http://svn.digium.com/svn/zaptel/trunk@2834 5390a7c7-147a-4af0-8ec9-7488f05a26cb
|
|
Merged revisions 2819 via svnmerge from
https://origsvn.digium.com/svn/zaptel/branches/1.4
Merged revisions 2818 via svnmerge from
https://origsvn.digium.com/svn/zaptel/branches/1.2
git-svn-id: http://svn.digium.com/svn/zaptel/trunk@2820 5390a7c7-147a-4af0-8ec9-7488f05a26cb
|
|
* Show Astribank 6+2 as 6/2 channels and not 8/8 channels.
- Added as a "subtype" to the device type (r4391).
* Fixed a panic in BRI span shutdown method (r4393).
* Changes to debug macros.
* Add proper sysfs support (r4406)
- A bus on whuch all of the Astribanks reside.
- Replaces useless sysfs code that existed in the module.
- Currently used to set the sync source automatically at device
adition / removal.
* BRI: We do need the T1 timer in NT. If it gets into G2 state (r4407).
Merged revisions 2812 via svnmerge from
https://origsvn.digium.com/svn/zaptel/branches/1.4
........
* Ignore generated files on the new wctdm24xxp dir. (from 1.2 r2796)
* Ignore two extra man pages on xpp/utils .
Merged revisions 2797 via svnmerge from
https://origsvn.digium.com/svn/zaptel/branches/1.4
........
* Generate list of Zaptel Modules directories automatically.
* Evaluate PERLLIBDIR only once.
Closes: #10223 (Xorcom changeset:4379, from 1.2 r2758)
Merged revisions 2759 via svnmerge from
https://origsvn.digium.com/svn/zaptel/branches/1.4
git-svn-id: http://svn.digium.com/svn/zaptel/trunk@2814 5390a7c7-147a-4af0-8ec9-7488f05a26cb
|
|
* Update to zaptel-1.2.18 and zaptel-1.4.3 (r4308 onward)
* Fix a critical race with zaptel synchronization (r4362)
* Added a /proc/xpp/cmds for statistics about command timing (r4360)
* Fix a digit mapping bug with hardware dtmf detection (r4357)
* In xpp/utils/Makefile add perl syntax checks to our scripts (r4337)
* Better USB data error checking (r4336)
* udev rules (xpp.rules) avoid false calls from wrong nodes (r4331)
* Improve hardware detection and reporting in lszaptel,
zaptel_hardware. zapconf is basically functional.
* Leds are blinked synchronously on all Astribanks now (r4262)
* Fix a BRI bug if OPTIMIZE_CHANMUTE was compiled into zaptel (r4258)
(This feature was not yet accepted into official zaptel)
* Removed compile warning about HZ != 1000 (r4218)
* Firmware updates.
* fpga_load now supports USB pathes without zeros (r4211)
* XPD numbers have changed to '<Unit><Subunit>' (r4196)
* Proper support for ZT_VMWI ioctl, if used in zaptel (r4092)
* Fix FXO power denial detection (r4054)
* FXO could accidentally go off-hook with some compilers (r4048)
(From branches/1.2 r2732, r2735 - branches/1.4 2736)
git-svn-id: http://svn.digium.com/svn/zaptel/trunk@2813 5390a7c7-147a-4af0-8ec9-7488f05a26cb
|
|
* Fix FXO power denial detection (changeset:4054)
* Incorrect data type could cause FXO module to go off-hook
(changeset:4048)
* xpp_fxloader: fix the error message when you want to disable automatic
firmware loading... (changeset:4060)
Merged from: branches/1.2 r2589
git-svn-id: http://svn.digium.com/svn/zaptel/trunk@2592 5390a7c7-147a-4af0-8ec9-7488f05a26cb
|
|
* Tested with zaptel-1.2.17.1
* Add D-Channel TX, RX and BAD frames count in /proc/xpp/XBUS-*/XPD-*/bri_info
* Adjust output of xpp_sync script. Pad for 8 port BRI.
* Added a debugging module parport_debug (not compiled by default).
* Added an optional patch to zaptel:
- compiles only if ZAPTEL_SYNC_TICK is defined
- Allow interested driver to register for "sync" notification.
- Does not affect drivers that do not use this feature.
* Added external synchronization feature:
- Only if ZAPTEL_SYNC_TICK feature is compiled in
- Than XPP may be synchronized by another card (e.g: an Astribank
with FXS can be synchronized by a Digium PRI card).
- May be enabled/disabled in runtime via the 'sync_tick_active' module
parameter to the xpp.ko module.
* Fixed a potential bug in D-Channel hexdump printing.
* New visual indications in BRI leds:
- Constant ON RED/GREEN: Shows the port type -- NT/TE.
- Very fast "double blink": Layer1 work, no D-Channel yet.
- Steady blinking (1/2 sec): D-Channel trafic detected.
* xpp_fxloader moved to /usr/share/zaptel .
* adj_clock removed: never really used.
* Now we have Zaptel::Hardware and a sample zaptel_hardware script (not
(installed by default).
* We also have a sample perl zapconf (not installed by default) which
aims at replacing genzaptelconf (sans the modules detection).
git-svn-id: http://svn.digium.com/svn/zaptel/trunk@2537 5390a7c7-147a-4af0-8ec9-7488f05a26cb
|
|
So don't enable it by default.
(From chabgeset 2520)
git-svn-id: http://svn.digium.com/svn/zaptel/trunk@2523 5390a7c7-147a-4af0-8ec9-7488f05a26cb
|
|
git-svn-id: http://svn.digium.com/svn/zaptel/trunk@2479 5390a7c7-147a-4af0-8ec9-7488f05a26cb
|
|
* Protocol no. 2.6: syncing improvements.
* Support for 8-port Astribank BRI.
* Firmware unloading now works:
rmmod xpp_usb; /etc/hotplug/usb/xpp_fxloader reset
* Defaults of kernel parameters are now part of parameter description.
* World-readable kernel parameters.
* No need for extra patch beyond bristuff for Astribank BRI.
* Default poll intervals changed: 500 in BRI and FXO.
* Allow changing FXS polls interval at run time.
* BRI initalization fixed on SUSE (path to logger).
* When using the SUSE zaptel rpm package, set modules_var=ZAPTEL_MODULES in
/etc/sysconfig/zaptel .
* zt_registration not verbose by default.
* xpp_sync warns if FXO is sync slave.
* Fixed genzaptelconf -z (zapscan output emulation).
* PCM fixes.
* Solves "multiple ticks" bug. No need for pcm_tasklets workaround.
git-svn-id: http://svn.digium.com/svn/zaptel/trunk@2478 5390a7c7-147a-4af0-8ec9-7488f05a26cb
|
|
/etc/asterisk/zapscan.conf the asterisk gui needs).
* Also put every digital span N in group 10+N (in addition to 0 / 5).
* Removed useless fxs/fxo-s lists, and other unused code.
* Add wcte12xp to the modules list. Prefer vzaphfc to zaphfc.
* Default to ptmp for zapbri signalling.
* Should be more readable.
git-svn-id: http://svn.digium.com/svn/zaptel/trunk@2332 5390a7c7-147a-4af0-8ec9-7488f05a26cb
|
|
r2286 | tzafrir | 2007-03-05 18:14:11 +0200 (Mon, 05 Mar 2007) | 2 lines
git-svn-id: http://svn.digium.com/svn/zaptel/trunk@2289 5390a7c7-147a-4af0-8ec9-7488f05a26cb
|
|
r2266 | tzafrir | 2007-03-02 22:40:06 +0200 (Fri, 02 Mar 2007) | 2 lines
git-svn-id: http://svn.digium.com/svn/zaptel/trunk@2269 5390a7c7-147a-4af0-8ec9-7488f05a26cb
|
|
SLAB_KERNEL is an obsolete alias of GFP_KERNEL. Fix build on Vanilla 2.6.20 .
git-svn-id: http://svn.digium.com/svn/zaptel/trunk@2260 5390a7c7-147a-4af0-8ec9-7488f05a26cb
|
|
Make the xpp/utils/Makefile in 1.2 closer to the one in 1.4
(and actually work, this tine).
git-svn-id: http://svn.digium.com/svn/zaptel/trunk@2254 5390a7c7-147a-4af0-8ec9-7488f05a26cb
|
|
------------------------------------------------------------------------
r2243 | tzafrir | 2007-02-28 02:05:59 +0200 (Wed, 28 Feb 2007) | 4 lines
* xpp rev. 3495: fix a race in the FXO driver of recent weeks.
* Add the Astribank BRI driver (though still needs bristuffed zaptel
to build and thus will not build by default)
------------------------------------------------------------------------
r2239 | tzafrir | 2007-02-27 08:14:18 +0200 (Tue, 27 Feb 2007) | 18 lines
Xorcom rev. 3491:
* Version of xpp modules is set from xpp/.version, rather than "unknown".
* Astribank devices are now initialized in parallel: faster startup
when there are multiple Astribanks.
* Re-added support for the old format of /proc/xpp/sync write:
(echo N 0 > /proc/xpp/sync ) . The new format (SYNC=NN) is preffered.
* Firmware update to fix a PCM issue.
* Fixed a build issue with kernel 2.6.8 .
* Fixed missing initialization in Zaptel::Xpp::Xbus .
* genzaptelconf will now set FXS ports as LS by default. To set them as
KS, use fxs_default_start=ks in /etc/default/zaptel / /etc/sysconfig/zaptel
(Also a workaround for #7755 ).
* Groundwork for sync from zaptel master span: if zaptel is built with
ZAPTEL_SYNC_TIC (see zaptel/team/tzafrir/sync ), xpp will report its
drift from the zaptel sync master.
* USB firmware update: had bad lines checksums (and fxload did not report).
* fpga_load can now better report bad hex file checksum ;-) .
------------------------------------------------------------------------
r2223 | tzafrir | 2007-02-24 03:05:05 +0200 (Sat, 24 Feb 2007) | 3 lines
Add the Zaptel and Zaptel::Xpp perl modules, and some simple
utilities that use them. disabled by default for now.
------------------------------------------------------------------------
r2222 | tzafrir | 2007-02-24 02:55:05 +0200 (Sat, 24 Feb 2007) | 2 lines
Make the xpp/utils/Makefile in 1.2 closer to the one in 1.4 .
git-svn-id: http://svn.digium.com/svn/zaptel/trunk@2247 5390a7c7-147a-4af0-8ec9-7488f05a26cb
|
|
(from changeset 2170)
git-svn-id: http://svn.digium.com/svn/zaptel/trunk@2171 5390a7c7-147a-4af0-8ec9-7488f05a26cb
|
|
https://origsvn.digium.com/svn/zaptel/branches/1.4
........
r2151 | tzafrir | 2007-02-11 17:48:01 +0200 (Sun, 11 Feb 2007) | 3 lines
struct inode and debugfs: break some Fedoras rather than all others.
(from changeset 2150)
........
git-svn-id: http://svn.digium.com/svn/zaptel/trunk@2152 5390a7c7-147a-4af0-8ec9-7488f05a26cb
|
|
https://origsvn.digium.com/svn/zaptel/branches/1.4
........
r2123 | tzafrir | 2007-02-08 02:05:17 +0200 (Thu, 08 Feb 2007) | 27 lines
Branch 1.4 is back in sync (currently: xorcom rev. 3332):
* Performance improvements for multi-XPD (span) devices.
* Astribank BRI driver (in next commit).
* Changes under /proc:
- XBUS and XPD numbers have two digits.
- Every script wildcard should be replaced from XBUS-? to XBUS-[0-9]*
- Added /proc/xpp/XBUS-*/XPD-*/blink: echo 1 to start and 0 to stop.
* Several countries (South Africa, UAE, anybody else) require a shorter
ring delay. Adjust FXO reg 0x17 (23)'s bits 0:2 to 011.
* Use tasklets to move most of the interrupt PCM copying out of the interrupt.
* Debugfs-based code to dump data to userspace (used to debug BRI D channel).
* Pretend every 2.6.9 actually has later RHEL's typedefs.
* fpga_load supports /dev/bus/usb .
* Fixed physical order sorting in genzaptelconf.
* Reverse polarity and power denial detection.
* A short led flash at registration time.
* Add a real version of the xpp modules to them (independent of the Zaptel
version).
* Update our line status even when not registered.
* Fixed a false SIG_CHANGED when inserting or removing cable to FXO.
* Fixed compilation fixes for 2.6.20 (Bug #8982)
* A cleaner fix for the bool changes of 2.6.19 .
* Automatically detect echo_can_state_t at debug time.
* Automaitcally set XPP_DEBUGFS (depending on debugfs) at compile time.
* Bug-fixes to zaptel-helper. Moved to xpp/utils .
* Xbus protocol version: 2.4 (Zaptel 1.2.12/1.4.0 had 2.3).
XPS Init scripts renamed accordingly.
........
r2124 | tzafrir | 2007-02-08 02:30:56 +0200 (Thu, 08 Feb 2007) | 1 line
Now 'chans' is used after all.
........
git-svn-id: http://svn.digium.com/svn/zaptel/trunk@2144 5390a7c7-147a-4af0-8ec9-7488f05a26cb
|
|
https://origsvn.digium.com/svn/zaptel/branches/1.4
................
r2111 | kpfleming | 2007-02-07 14:36:52 -0600 (Wed, 07 Feb 2007) | 11 lines
Merged revisions 2110 via svnmerge from
https://origsvn.digium.com/svn/zaptel/branches/1.2
........
r2110 | kpfleming | 2007-02-07 14:29:22 -0600 (Wed, 07 Feb 2007) | 3 lines
build XPP on the kernels that Xorcom says are OK to build on
update workqueue usage to conform to kernel 2.6.20 API
........
................
git-svn-id: http://svn.digium.com/svn/zaptel/trunk@2112 5390a7c7-147a-4af0-8ec9-7488f05a26cb
|
|
r2064: tzafrir | 2007-01-31 21:48:39 +0200
zaptel-helper deserves wider exposure. Note: it is not getting installed.
However it will probably help preven the braking of Astribank drivers
loading for those who do care.
git-svn-id: http://svn.digium.com/svn/zaptel/trunk@2070 5390a7c7-147a-4af0-8ec9-7488f05a26cb
|
|
Merging 1.2 changes of genzaptelconf:
* -l (list) now works reliebly.
* Cleared some leftover writes to standard output.
* Fixed xpp spans sort order.
git-svn-id: http://svn.digium.com/svn/zaptel/trunk@2069 5390a7c7-147a-4af0-8ec9-7488f05a26cb
|
|
https://origsvn.digium.com/svn/zaptel/branches/1.4
................
r1921 | kpfleming | 2007-01-23 09:29:28 -0600 (Tue, 23 Jan 2007) | 10 lines
Merged revisions 1920 via svnmerge from
https://origsvn.digium.com/svn/zaptel/branches/1.2
........
r1920 | kpfleming | 2007-01-23 09:25:42 -0600 (Tue, 23 Jan 2007) | 2 lines
clean up various compiler warnings
........
................
git-svn-id: http://svn.digium.com/svn/zaptel/trunk@1922 5390a7c7-147a-4af0-8ec9-7488f05a26cb
|
|
https://origsvn.digium.com/svn/zaptel/branches/1.4
................
r1767 | kpfleming | 2006-12-27 16:49:37 -0600 (Wed, 27 Dec 2006) | 10 lines
Merged revisions 1766 via svnmerge from
https://origsvn.digium.com/svn/zaptel/branches/1.2
........
r1766 | kpfleming | 2006-12-27 16:47:19 -0600 (Wed, 27 Dec 2006) | 2 lines
remove pointless duplication of ZAPTEL_VERSION that causes these modules to be rebuilt every time a commit is made to any part of Zaptel
........
................
git-svn-id: http://svn.digium.com/svn/zaptel/trunk@1768 5390a7c7-147a-4af0-8ec9-7488f05a26cb
|
|
r1724@boole: tzafrir | 2006-12-18 15:55:59 +0200
Code is 2.6-specific anyway, no need for an explicit test.
git-svn-id: http://svn.digium.com/svn/zaptel/trunk@1733 5390a7c7-147a-4af0-8ec9-7488f05a26cb
|
|
r1723@boole: tzafrir | 2006-12-18 15:54:04 +0200
Use the internal version (without locking) of usb_reset_device.
Intended for kernel 2.6.9 and earlier. Finally full support of 2.6.8 and 2.6.9.
r2937: diego | 2006-12-17 14:20:36 +0200
r2940: tzafrir | 2006-12-17 16:32:51 +0200
git-svn-id: http://svn.digium.com/svn/zaptel/trunk@1732 5390a7c7-147a-4af0-8ec9-7488f05a26cb
|
|
r1722@boole: tzafrir | 2006-12-18 15:50:36 +0200
xpp_zap.c: Better error hanlding during module init.
orig r2948: oron | 2006-12-17 18:54:00 +0200
git-svn-id: http://svn.digium.com/svn/zaptel/trunk@1731 5390a7c7-147a-4af0-8ec9-7488f05a26cb
|
|
r1721@boole: tzafrir | 2006-12-18 15:46:42 +0200
Assume every 2.6.9 kernel is a later RHEL4 kernel, which backported
the gfp_t typedef. Either way we break some systems).
r2938: diego | 2006-12-17 14:22:16 +0200
git-svn-id: http://svn.digium.com/svn/zaptel/trunk@1730 5390a7c7-147a-4af0-8ec9-7488f05a26cb
|
|
Sync to xpp RELEASE-1.2.0 2933.
r2847@boole: diego | 2006-12-03 10:33:00 +0200
added documentation which explains which packages are needed to build
the drivers on different distributions.
r2862@boole: tzafrir | 2006-12-05 08:43:50 +0200
README.Astribank: A typo in the sample config (changeset:2861).
r2891@boole: tzafrir | 2006-12-08 01:11:45 +0200
Re-accept changeset:2832 after all.
r2892@boole: tzafrir | 2006-12-08 02:46:07 +0200
Merge genzaptelconf changeset:2866 from trunk:
* Zapata comment on unidentified channel goes to $zapata_file
* Correct pattern for Sangoma A200 card's channels.
r2893@boole: tzafrir | 2006-12-08 03:11:37 +0200
genzaptelconf:
* Add options xpp_fxo_rxgain: add a custom rxgain for every XPP FXO channel.
* Do print the original line for every channel.
r2909@boole: tzafrir | 2006-12-10 20:03:59 +0200
Add some sleeps in older kernels in the firmware loading script.
r2932@boole: tzafrir | 2006-12-14 17:30:12 +0200
Make the warning about a call to off-hook FXO debug. At least if we
cannot suppress it at module load time.
r2933@boole: tzafrir | 2006-12-14 17:32:00 +0200
Don't redefine 'bool' on newer kerenls to fix building with kernel
2.6.19. Taken from Digium tree.
(from changeset:2930)
git-svn-id: http://svn.digium.com/svn/zaptel/trunk@1720 5390a7c7-147a-4af0-8ec9-7488f05a26cb
|
|
Firmwares to fix caller ID detection timing issue.
git-svn-id: http://svn.digium.com/svn/zaptel/trunk@1717 5390a7c7-147a-4af0-8ec9-7488f05a26cb
|
|
https://origsvn.digium.com/svn/zaptel/branches/1.4
................
r1701 | kpfleming | 2006-12-11 13:07:58 -0600 (Mon, 11 Dec 2006) | 10 lines
Merged revisions 1700 via svnmerge from
https://origsvn.digium.com/svn/zaptel/branches/1.2
........
r1700 | kpfleming | 2006-12-11 13:05:43 -0600 (Mon, 11 Dec 2006) | 2 lines
kernel 2.6.19 now has a type called 'bool', although it's not completely implemented so there will still be some warnings when building xpp against 2.6.19 kernel headers
........
................
git-svn-id: http://svn.digium.com/svn/zaptel/trunk@1702 5390a7c7-147a-4af0-8ec9-7488f05a26cb
|
|
r1671@boole: tzafrir | 2006-12-01 01:30:24 +0200
r2806@boole: oron | 2006-11-27 16:54:06 +0200
Fixed panic in ticket:147 merged code from changeset:2802 changeset:2804
git-svn-id: http://svn.digium.com/svn/zaptel/trunk@1684 5390a7c7-147a-4af0-8ec9-7488f05a26cb
|
|
r1670@boole: tzafrir | 2006-12-01 01:29:57 +0200
r2794@boole: oron | 2006-11-26 14:24:15 +0200
Remove all SOFT_RING code (unused for a long time).
git-svn-id: http://svn.digium.com/svn/zaptel/trunk@1683 5390a7c7-147a-4af0-8ec9-7488f05a26cb
|
|
r1668@boole: tzafrir | 2006-11-30 23:48:25 +0200
r2832@boole: tzafrir | 2006-11-29 11:06:06 +0200
Add parameter xpp_ec to the module xpp (xpp_zap.c). Defaults to 1.
If 0, module will use Zaptel echo canceller even with XPP_EC_CHUNK.
Parameter is read-only for now: cannot be set through /sys/modules.
(Merge of changeset:2830)
git-svn-id: http://svn.digium.com/svn/zaptel/trunk@1682 5390a7c7-147a-4af0-8ec9-7488f05a26cb
|
|
r2831@boole: tzafrir | 2006-11-29 11:05:08 +0200
genzaptelconf: A list of countries for which to use busydetect.
(and get genzaptelconf here back in sync)
git-svn-id: http://svn.digium.com/svn/zaptel/trunk@1681 5390a7c7-147a-4af0-8ec9-7488f05a26cb
|
|
* Removing -DSOFT_RING: unused, useless code.
* Register init scripts are not as noisy by default.
* Register init scripts read configuration from a standard location.
* Fixed a FXO spinlock race.
(Log was lost on previos merge)
git-svn-id: http://svn.digium.com/svn/zaptel/trunk@1680 5390a7c7-147a-4af0-8ec9-7488f05a26cb
|
|
we set (except signalling). Isn't zapata.conf fun to work with?
* Allow different signalling type for ZapBRI through ZAPBRI_SIGNALLING.
- Note that even "pri" ZAPBRI_SIGNALLING requires bristuffed zaptel.
* All in all a good reason to increase version number.
git-svn-id: http://svn.digium.com/svn/zaptel/trunk@1640 5390a7c7-147a-4af0-8ec9-7488f05a26cb
|
|
git-svn-id: http://svn.digium.com/svn/zaptel/trunk@1624 5390a7c7-147a-4af0-8ec9-7488f05a26cb
|
|
init_card[34]_23: merge from 2654,2655.
* Redirect stderr to /dev/null.
Without any redirection, it may fail with exitval=4 .
Probably, fd 2 is closed and the shell (or sed which is
used in the scripts) tries to write to it (or do some other
I/O related syscall) which fails.
* make XPP_BASE handling identical in the two scripts.
git-svn-id: http://svn.digium.com/svn/zaptel/trunk@1591 5390a7c7-147a-4af0-8ec9-7488f05a26cb
|
|
Fixed a typo in the "wctdm reimplementation".
git-svn-id: http://svn.digium.com/svn/zaptel/trunk@1572 5390a7c7-147a-4af0-8ec9-7488f05a26cb
|
|
Fixes for card init scripts from rev 2633:
* Don't log card init scripts to /tmp/results .
* Document how to trace, though.
* init_card_4_23: don't re-open the slics file.
git-svn-id: http://svn.digium.com/svn/zaptel/trunk@1564 5390a7c7-147a-4af0-8ec9-7488f05a26cb
|
|
Merging xpp driver release 1.2 (rev. 2569), originally team/tzafrir/xpp_1.2
* Should build well. Almost final.
* genzaptelconf: Also work when zap_autoreg=0
* README.Astribank updated for rev. 1.2.
* xpp/utils/Makefile: Use $< with cc -c
* Get xpp/utils configuration from autoconf (without changesin top dir)
git-svn-id: http://svn.digium.com/svn/zaptel/trunk@1563 5390a7c7-147a-4af0-8ec9-7488f05a26cb
|
|
instead of setting HOSTCC and CC directly in the Makefile, use the information
provided by the configure script (issue #8055, tzafrir)
git-svn-id: http://svn.digium.com/svn/zaptel/trunk@1562 5390a7c7-147a-4af0-8ec9-7488f05a26cb
|
|
git-svn-id: http://svn.digium.com/svn/zaptel/trunk@1561 5390a7c7-147a-4af0-8ec9-7488f05a26cb
|
|
https://origsvn.digium.com/svn/zaptel/branches/1.4
........
r1547 | russell | 2006-11-01 14:04:02 -0500 (Wed, 01 Nov 2006) | 3 lines
instead of setting HOSTCC and CC directly in the Makefile, use the information
provided by the configure script (issue #8055, tzafrir)
........
git-svn-id: http://svn.digium.com/svn/zaptel/trunk@1548 5390a7c7-147a-4af0-8ec9-7488f05a26cb
|
|
git-svn-id: http://svn.digium.com/svn/zaptel/trunk@1455 5390a7c7-147a-4af0-8ec9-7488f05a26cb
|
|
git-svn-id: http://svn.digium.com/svn/zaptel/trunk@1453 5390a7c7-147a-4af0-8ec9-7488f05a26cb
|
|
git-svn-id: http://svn.digium.com/svn/zaptel/trunk@1424 5390a7c7-147a-4af0-8ec9-7488f05a26cb
|