Age | Commit message (Collapse) | Author |
|
For finer details and separate commits, you are advised to look into the
commit log of dahdi-{linux,tools}.
xpp.r7150
* 116x Astribanks:
- Support for the TwinStar capability and for FXO and (BRI|PRI) on
same device.
- New control protocol ("MPP").
- astribank_hextool - a low-level firmware loading tool instead of
fpga_load .
- astribank_tool - Other MPP activities .
- Can still reset (but just that) through older protocol.
- astribank_hexload is required for loading FPGA firmware for USB_FW.hex
rev > 6885.
- USB_FW rev. 7071 .
- More modular FPGA firmware (1161 only).
- FPGA_1161.hex rev. 7131. PIC_TYPE_* rev. 7107.
- software-settings of some capabilities with astribank_allow .
* XPP:
- init_card_* script are less verbose.
- Reduced rate of "Is a DAHDI sync master" message.
- Replace member bus_id with dev_name() and set_dev_name() for
building with 2.6.30.
- Conditionally remove 'owner' property of procfs was dropped in 2.6.30.
- astribank_hook now enabled by default.
- Has an optional hook for TwinStar.
* BRI:
- hardhdlc support: The bri_dchan patch is no longer needed.
- If bri_dchan patch applied: old code is used, and "dchan" is used.
- If not: new code and "hardhdlc" is used.
- zapconf will generate the right configuration, depending on the new
sysfs driver attribute bri_hardhdlc, but default to "dchan" as
before if not explicitly told.
- Bugfix: explicitly turn off leds on startup.
* FXS:
- Initialization and calibration fixes.
- Notify the user just one about wrong VMWI config
* Dahdi-perl:
- Fix detection of empty slots in wctdm.
- Fix working with ethmf's extra file in /proc/zaptel
- Improved detection of Rhino cards.
- dahdi_genconf's generated text better explains files are generated.
- /etc/xpp_order - allow specifiying an explicit order for
Astribanks to register with Zaptel.
- Dahdi::Xpp::Mpp - A wrapper around astribank_tool .
* dahdi.init:
- A separate waitfor_xpds script. May now have a wait-loop in
some cases.
- xpp_sync needs to only be called after dahdi_cfg .
(for the PRI module).
git-svn-id: http://svn.digium.com/svn/zaptel/branches/1.4@4641 5390a7c7-147a-4af0-8ec9-7488f05a26cb
|
|
xpp_sync needs to only be called after ztcfg was run, because the
application of zaptel.conf may change the priority of a PRI module span
(If it is a sync provider, "NT", priority is lower).
(From DAHDI rev 6167)
git-svn-id: http://svn.digium.com/svn/zaptel/branches/1.4@4629 5390a7c7-147a-4af0-8ec9-7488f05a26cb
|
|
confusing.
(closes issue #12459)
Reported by: panderson
Patches:
zaptel.init.patch uploaded by panderson (license 469)
git-svn-id: http://svn.digium.com/svn/zaptel/branches/1.4@4217 5390a7c7-147a-4af0-8ec9-7488f05a26cb
|
|
git-svn-id: http://svn.digium.com/svn/zaptel/branches/1.4@3529 5390a7c7-147a-4af0-8ec9-7488f05a26cb
|
|
Issue 10902, patch by snuffy
git-svn-id: http://svn.digium.com/svn/zaptel/branches/1.4@3455 5390a7c7-147a-4af0-8ec9-7488f05a26cb
|
|
is already running.
git-svn-id: http://svn.digium.com/svn/zaptel/branches/1.4@3090 5390a7c7-147a-4af0-8ec9-7488f05a26cb
|
|
git-svn-id: http://svn.digium.com/svn/zaptel/branches/1.4@3070 5390a7c7-147a-4af0-8ec9-7488f05a26cb
|
|
* Make fxotune -s less verbose by default so it won't make noise
for the init.d script.
git-svn-id: http://svn.digium.com/svn/zaptel/branches/1.4@3045 5390a7c7-147a-4af0-8ec9-7488f05a26cb
|
|
git-svn-id: http://svn.digium.com/svn/zaptel/branches/1.4@3017 5390a7c7-147a-4af0-8ec9-7488f05a26cb
|
|
Merged revisions 3015 via svnmerge from
http://svn.digium.com/svn/zaptel/branches/1.2
git-svn-id: http://svn.digium.com/svn/zaptel/branches/1.4@3016 5390a7c7-147a-4af0-8ec9-7488f05a26cb
|
|
https://origsvn.digium.com/svn/zaptel/branches/1.2
........
r3013 | file | 2007-09-13 18:31:30 -0300 (Thu, 13 Sep 2007) | 2 lines
Add TE120P to init script.
........
git-svn-id: http://svn.digium.com/svn/zaptel/branches/1.4@3014 5390a7c7-147a-4af0-8ec9-7488f05a26cb
|
|
git-svn-id: http://svn.digium.com/svn/zaptel/branches/1.4@2954 5390a7c7-147a-4af0-8ec9-7488f05a26cb
|
|
* Allow overriding it from cwrcconfconfig file (and explain how).
(From trunk r2909 - got accidentally commited there first).
Merged revisions 2910 via svnmerge from
https://origsvn.digium.com/svn/zaptel/branches/1.2
git-svn-id: http://svn.digium.com/svn/zaptel/branches/1.4@2911 5390a7c7-147a-4af0-8ec9-7488f05a26cb
|
|
git-svn-id: http://svn.digium.com/svn/zaptel/branches/1.4@2740 5390a7c7-147a-4af0-8ec9-7488f05a26cb
|
|
* Update README accordingly.
* Continue documenting Zaptel, while we're updating the README.
* Ignore the generated README.html.
git-svn-id: http://svn.digium.com/svn/zaptel/branches/1.4@2711 5390a7c7-147a-4af0-8ec9-7488f05a26cb
|
|
And all of them simply supressed errors, so they were replaced with
2> /dev/null .
(from branches/1.2 r2689)
git-svn-id: http://svn.digium.com/svn/zaptel/branches/1.4@2690 5390a7c7-147a-4af0-8ec9-7488f05a26cb
|
|
git-svn-id: http://svn.digium.com/svn/zaptel/branches/1.4@2688 5390a7c7-147a-4af0-8ec9-7488f05a26cb
|
|
* Add optional support for using the zaptel perl functions.
(From branches/1.2 changesset:2670 and changeset:2673)
git-svn-id: http://svn.digium.com/svn/zaptel/branches/1.4@2674 5390a7c7-147a-4af0-8ec9-7488f05a26cb
|
|
* Someone with a dynamic span, please test the suggested replacement
(remmed-out).
* Reduced nesting in wait_for_xpp .
git-svn-id: http://svn.digium.com/svn/zaptel/branches/1.4@2660 5390a7c7-147a-4af0-8ec9-7488f05a26cb
|
|
git-svn-id: http://svn.digium.com/svn/zaptel/branches/1.4@2659 5390a7c7-147a-4af0-8ec9-7488f05a26cb
|
|
git-svn-id: http://svn.digium.com/svn/zaptel/branches/1.4@2658 5390a7c7-147a-4af0-8ec9-7488f05a26cb
|
|
git-svn-id: http://svn.digium.com/svn/zaptel/branches/1.4@2495 5390a7c7-147a-4af0-8ec9-7488f05a26cb
|
|
git-svn-id: http://svn.digium.com/svn/zaptel/branches/1.4@2480 5390a7c7-147a-4af0-8ec9-7488f05a26cb
|
|
https://origsvn.digium.com/svn/zaptel/branches/1.2
........
r2350 | russell | 2007-03-29 11:35:37 -0500 (Thu, 29 Mar 2007) | 4 lines
Trim the HPEC readme that is included in zaptel to only include basic information
as the one on the FTP site will always be the one that contains the full up to
date information. Also, tweak some grammar in the additions to the init script.
........
git-svn-id: http://svn.digium.com/svn/zaptel/branches/1.4@2351 5390a7c7-147a-4af0-8ec9-7488f05a26cb
|
|
https://origsvn.digium.com/svn/zaptel/branches/1.2
........
r2347 | russell | 2007-03-29 11:05:32 -0500 (Thu, 29 Mar 2007) | 3 lines
Add a README for HPEC, and add support for HPEC in the init script.
(issue #9413, chozian)
........
git-svn-id: http://svn.digium.com/svn/zaptel/branches/1.4@2348 5390a7c7-147a-4af0-8ec9-7488f05a26cb
|
|
https://origsvn.digium.com/svn/zaptel/branches/1.2
........
r2342 | russell | 2007-03-27 13:48:23 -0500 (Tue, 27 Mar 2007) | 5 lines
When debug is enabled, ensure that "debug=1" gets passed to the zaptel module,
and not just the hardware modules. Also, run "ztcfg -s" at the beginning of
the "stop" action of the script.
(issue #7409, PCadach and tzafrir)
........
git-svn-id: http://svn.digium.com/svn/zaptel/branches/1.4@2343 5390a7c7-147a-4af0-8ec9-7488f05a26cb
|
|
git-svn-id: http://svn.digium.com/svn/zaptel/branches/1.4@2273 5390a7c7-147a-4af0-8ec9-7488f05a26cb
|
|
https://origsvn.digium.com/svn/zaptel/branches/1.2
........
r1317 | tilghman | 2006-08-15 20:36:34 -0500 (Tue, 15 Aug 2006) | 2 lines
Bug 7624 - Debian lacks /var/lock/subsys
........
git-svn-id: http://svn.digium.com/svn/zaptel/trunk@1318 5390a7c7-147a-4af0-8ec9-7488f05a26cb
|
|
git-svn-id: http://svn.digium.com/svn/zaptel/trunk@936 5390a7c7-147a-4af0-8ec9-7488f05a26cb
|
|
git-svn-id: http://svn.digium.com/svn/zaptel/trunk@889 5390a7c7-147a-4af0-8ec9-7488f05a26cb
|
|
git-svn-id: http://svn.digium.com/svn/zaptel/trunk@837 5390a7c7-147a-4af0-8ec9-7488f05a26cb
|
|
git-svn-id: http://svn.digium.com/svn/zaptel/trunk@616 5390a7c7-147a-4af0-8ec9-7488f05a26cb
|
|
drivers find any Zaptel hardware (bug #3886)
git-svn-id: http://svn.digium.com/svn/zaptel/trunk@612 5390a7c7-147a-4af0-8ec9-7488f05a26cb
|
|
git-svn-id: http://svn.digium.com/svn/zaptel/trunk@591 5390a7c7-147a-4af0-8ec9-7488f05a26cb
|
|
git-svn-id: http://svn.digium.com/svn/zaptel/trunk@571 5390a7c7-147a-4af0-8ec9-7488f05a26cb
|
|
git-svn-id: http://svn.digium.com/svn/zaptel/trunk@552 5390a7c7-147a-4af0-8ec9-7488f05a26cb
|
|
git-svn-id: http://svn.digium.com/svn/zaptel/trunk@530 5390a7c7-147a-4af0-8ec9-7488f05a26cb
|
|
git-svn-id: http://svn.digium.com/svn/zaptel/trunk@491 5390a7c7-147a-4af0-8ec9-7488f05a26cb
|
|
git-svn-id: http://svn.digium.com/svn/zaptel/trunk@212 5390a7c7-147a-4af0-8ec9-7488f05a26cb
|
|
git-svn-id: http://svn.digium.com/svn/zaptel/trunk@184 5390a7c7-147a-4af0-8ec9-7488f05a26cb
|
|
git-svn-id: http://svn.digium.com/svn/zaptel/trunk@154 5390a7c7-147a-4af0-8ec9-7488f05a26cb
|
|
git-svn-id: http://svn.digium.com/svn/zaptel/trunk@127 5390a7c7-147a-4af0-8ec9-7488f05a26cb
|
|
git-svn-id: http://svn.digium.com/svn/zaptel/trunk@84 5390a7c7-147a-4af0-8ec9-7488f05a26cb
|