path: root/zaptel.init

#!/bin/sh
#
# zaptel        This shell script takes care of loading and unloading \
#               Zapata Telephony interfaces
# chkconfig: 2345 9 92
# description: The zapata telephony drivers allow you to use your linux \
# computer to accept incoming data and voice interfaces
#
# config: /etc/sysconfig/zaptel

initdir=/etc/init.d

ZTCFG=/sbin/ztcfg
ZTCFG_CMD="$ZTCFG" # e.g: for a custom zaptel.conf location

#
# Determine which kind of configuration we're using
#
system=redhat  # assume redhat
if [ -f /etc/debian_version ]; then
    system=debian
fi

# Source function library.
if [ $system = redhat ]; then
    . $initdir/functions || exit 0
fi

# Source zaptel configuration.
if [ $system = debian ]; then
    [ -f /etc/default/zaptel ] && . /etc/default/zaptel
	LOCKFILE=/var/lock/zaptel
elif [ $system = redhat ]; then
    [ -f /etc/sysconfig/zaptel ] && . /etc/sysconfig/zaptel
	LOCKFILE=/var/lock/subsys/zaptel
fi

if [ -z "${MODULES}" ]; then 
	# Populate defaults if not present
	MODULES="tor2 wct4xxp wct1xxp wcte11xp wcfxo wctdm wctdm24xxp" 
fi

# recursively unload a module and its dependencies, if possible.
# where's modprobe -r when you need it?
# inputs: module to unload.
# returns: the result from 
unload_module() {
	module="$1"
	line=`lsmod 2>/dev/null | grep "^$1 "`
	if [ "$line" = '' ]; then return; fi # module was not loaded

	set -- $line
	# $1: the original module, $2: size, $3: refcount, $4: deps list
	mods=`echo $4 | tr , ' '`
	for mod in $mods; do
		# run in a subshell, so it won't step over our vars:
		(unload_module $mod) 
		# TODO: the following is probably the error handling we want:
		# if [ $? != 0 ]; then return 1; fi
	done
	rmmod $module
}

# Wait for Astribank to initialize registers:
wait_for_xpp() {
	if [ -d /proc/xpp ]
	then
		# reading from waitfor_xpds only returns when the device
		# has finished initilizing its regiters and is available.
		cat /proc/xpp/XBUS-*/waitfor_xpds 2>/dev/null >/dev/null  || true
	fi
}

# Register to zaptel Astribank spans that were not autoomatically registered
# (useful when you have more than one Astribank)
zap_reg_xpp() {
	if [ ! -d /proc/xpp ]; then return; fi
	
	# Get a list of connected Astribank devices, sorted by the name of 
	# the USB connector. That order is rather arbitrary, but will not 
	# change without changes to the cabling.
	xbusses=`sort -k 2 /proc/xpp/xbuses | awk -F: '/STATUS=connected/ {print $1}'`

	# get a list of XPDs that were not yet registered as zaptel spans.
	# this will be the case if you set the parameter zap_autoreg=0 to
	# the module xpp
	# Append /dev/null to provide a valid file name in case of an empty pattern.
	xbusses_pattern=`echo $xbusses| sed -e 's|XBUS-[0-9]*|/proc/xpp/&/XPD-*/zt_registration|g'`' /dev/null'
	xpds_to_register=`grep -l 0 $xbusses_pattern 2>/dev/null` || true
	for file in $xpds_to_register; do
		echo 1 >$file
	done
}

# If the system has an Astribank, select the right one as the sync source.
# TODO: replace the sryptic awk code with 'xpp_sync auto' once it is in.
fix_asterisbank_sync() {
	# do nothing if module not present
	if [ ! -d /proc/xpp ]; then return; fi
	
	#if ! grep -q '^HOST' /proc/xpp/sync 2>/dev/null; then return; fi

	case "$XPP_SYNC" in
	n*|N*) return;;
	host|HOST) sync_value="HOST";;
	[0-9]*)sync_value="$XPP_SYNC";;
	*) 
		# find the number of the first bus, and sync from it:
		fxo_pat=`awk -F: '/STATUS=connected/{print $1}' /proc/xpp/xbuses | sed -e 's|.*|/proc/xpp/&/*/fxo_info|'`
		# find the first FXO unit, and set it as the sync master
		bus=`ls -1 $fxo_pat 2> /dev/null | head -n1 | cut -d- -f2 | cut -d/ -f1` 
		
		if [ "$bus" = '' ]; then
			# no device with FXO found. Just get the first one
			bus=`awk -F: '/STATUS=connected/{print $1}' /proc/xpp/xbuses | head -n 1 | cut -d- -f2`
		fi

		# do nothing if there is no bus:
		case "$bus" in [0-9]*):;; *) return;; esac
		sync_value="SYNC=$bus"
		;;
	esac
	# the built-in echo of bash fails to print a proper error on failure
	if ! /bin/echo "$sync_value" >/proc/xpp/sync
	then 
		echo >2 "Updating XPP sync source failed (tried \"$sync_value\", XPP_SYNC='$XPP_SYNC')"
	fi
}

# Check that telephony is up.
[ "${TELEPHONY}" = "yes" ] || exit 0

[ -x "$ZTCFG" ] || exit 0

[ -f /etc/zaptel.conf ] || exit 0

if [ "${DEBUG}" = "yes" ]; then
	ARGS="debug=1"
fi

run_ztcfg() {
	if [ $system = debian ]; then
	 	echo -n "Running ztcfg: " 
	 	$ZTCFG_CMD && echo -n "done"
		RETVAL=$?
		echo "."
	elif [ $system = redhat ]; then
		action "Running ztcfg: " $ZTCFG_CMD
		RETVAL=$?
	fi
}

RETVAL=0

# See how we were called.
case "$1" in
  start)
	# Load drivers
	rmmod wcusb 2> /dev/null
	rmmod wcfxsusb 2> /dev/null
	rmmod audio 2> /dev/null
	if [ $system = debian ]; then
	    echo -n "Loading zaptel framework: " 
	    modprobe zaptel ${ARGS} 2> /dev/null && echo -n "done"
	    echo "."
	elif [ $system = redhat ]; then
	    action "Loading zaptel framework: " modprobe zaptel ${ARGS}
	fi
	echo -n "Waiting for zap to come online..."
	TMOUT=10 # max secs to wait
	while [ ! -d /dev/zap ] ; do
 		sleep 1
		TMOUT=`expr $TMOUT - 1`
		if [ $TMOUT -eq 0 ] ; then
			echo "Error: missing /dev/zap!"
			exit 1
		fi
	done
	echo "OK"
	echo -n "Loading zaptel hardware modules:"
	for x in $MODULES; do 
		eval localARGS="\$${x}_ARGS"
		if modprobe ${x} ${ARGS} ${localARGS} 2> /dev/null; then
			echo -n " $x"
		fi
	done
	sleep 3 # TODO: remove it
	
	wait_for_xpp
	zap_reg_xpp
	fix_asterisbank_sync # can actually be run after ztcfg
	
	if head -c 0 /dev/zap/pseudo; then 
		echo "No Zaptel timing source sound. loading ztdummy"
		modprobe ztdummy 
	fi

	run_ztcfg

	RETVAL=$?

	[ $RETVAL -eq 0 ] && touch $LOCKFILE
	
	# check for HPEC licenses
	for f in /var/lib/digium/licenses/HPEC*.lic; do
		if [ -f ${f} ]; then
			haveHPEC = 1
		fi
	done

	# HPEC license found
	if [ -n "${haveHPEC}" ]; then
		# zaphpec_enable not installed in /usr/sbin
		if [ ! -f /usr/sbin/zaphpec_enable ]; then
			echo -n "Running zaphpec_enable: Failed"
			echo -n "."
			echo "  The zaphpec_enable binary is not installed in /usr/sbin."
		else
			# zaphpec_enable not set executable
			if [ ! -x /usr/sbin/zaphpec_enable ]; then
				echo -n "Running zaphpec_enable: Failed"
				echo -n "."
				echo "  /usr/sbin/zaphpec_enable is not set as executable."
			else
				# zaphpec_enable properly installed
				if [ $system = debian ]; then
					echo -n "Running zaphpec_enable: "
					/usr/sbin/zaphpec_enable 2> /dev/null
				elif [ $system = redhat ]; then
					action "Running zaphpec_enable: " /usr/sbin/zaphpec_enable
				fi
				if [ $? = 0 ]; then
					echo -n "done"
					echo "."
				else
					echo -n "Failed"
					echo -n "."
					echo "  This can be caused if you had already run zaphpec_enable, or if your HPEC license is no longer valid."
				fi
			fi
		fi
	fi
	;;
  stop)
	# Unload drivers
	echo -n "Unloading zaptel hardware drivers:"
  	unload_module zaptel
	RETVAL=$?
	echo "."

	[ $RETVAL -eq 0 ] && rm -f $LOCKFILE
	;;
  unload)
	# We don't have zaptel helper, so let's not replicate too much code:
	# allow others to use the unload command.
  	unload_module zaptel
	;;
  restart)
	$0 stop
	$0 start
	;;
  reload)
	run_ztcfg
	
	;;
  *)
	echo "Usage: zaptel {start|stop|restart|reload}"
	exit 1
esac

exit $RETVAL