| Age | Commit message (Collapse) | Author |
|---|
|
(merged branch /zaptel/team/tzafrir/move )
Closes issue #7117.
git-svn-id: http://svn.digium.com/svn/zaptel/branches/1.4@3793 5390a7c7-147a-4af0-8ec9-7488f05a26cb
|
|
Merged revisions 3766 via svnmerge from
http://svn.digium.com/svn/zaptel/branches/1.2
git-svn-id: http://svn.digium.com/svn/zaptel/branches/1.4@3767 5390a7c7-147a-4af0-8ec9-7488f05a26cb
|
|
* Improved polarity reversal hangups in FXO (r5194).
Fixed false detection of polarity reversals.
* Optimize xframe allocation, by not zeroing the whole
memory (in get_xframe()).
* Fixed erronous error message that appeared sometimes
from fpga_load during USB renumeration.
* Zaptel::Chans now provides battery() reporting for some FXO
channels (Astribank FXO and wcfxo).
Merged revisions 3643 via svnmerge from
http://svn.digium.com/svn/zaptel/branches/1.2
git-svn-id: http://svn.digium.com/svn/zaptel/branches/1.4@3646 5390a7c7-147a-4af0-8ec9-7488f05a26cb
|
|
git-svn-id: http://svn.digium.com/svn/zaptel/branches/1.4@3569 5390a7c7-147a-4af0-8ec9-7488f05a26cb
|
|
* Some more documentation.
Merged revisions 3555 via svnmerge from
http://svn.digium.com/svn/zaptel/branches/1.2
git-svn-id: http://svn.digium.com/svn/zaptel/branches/1.4@3556 5390a7c7-147a-4af0-8ec9-7488f05a26cb
|
|
* Do use "crc4" for E1 by default when generating zaptel.conf .
Merged revisions 3540 via svnmerge from
http://svn.digium.com/svn/zaptel/branches/1.2
git-svn-id: http://svn.digium.com/svn/zaptel/branches/1.4@3541 5390a7c7-147a-4af0-8ec9-7488f05a26cb
|
|
* xpd_pri: Basically ready.
* PCM synchronization changes:
- Each Astribank unit ticks independently. Each with its own PLL.
- HOST synchronization is gone. Loading of xpp will no longer cause
useless 250 ticks per second if you have no Astribank.
- Synchronization from the zaptel sync master requires setting
ZAPTEL as sync source (xpp_sync ZAPTEL).
* rx_tasklet is now a parameter of the module xpp, rather than of xpp_usb.
* New FPGA firmware: 5128 (1151) / 5122 (1141, 1131):
- Fixes synchronization issues.
- PRI module: E1 should now work.
* perl module and utilities:
- Modules no longer magically scan system on initialization.
- Scanning is by calling explicit methods.
- "Serial" has been renamed "Label". It is basically unique, but
should be modifieble.
- Some basic documentation of zaptel perl modules.
* Default sort order of zt_registration is back to SORT_CONNCTOR.
* zt_registration proc file now shows the number of span registered to
if registered. Try: grep . /proc/xpp/XBUS-*/XPD-*/zt_registration
* genzaptelconf: Allow using a custom command instead of
/etc/init.d/asterisk to start/stop asterisk.
* Fixed the typo "Slagish".
Merged revisions 3506 via svnmerge from
http://svn.digium.com/svn/zaptel/branches/1.2
git-svn-id: http://svn.digium.com/svn/zaptel/branches/1.4@3508 5390a7c7-147a-4af0-8ec9-7488f05a26cb
|
|
* zaptel-perl: Fix reporting of empty slots in analog Digium cards.
* genzaptelconf: More readable case-s.
Merged revisions 3217 via svnmerge from
http://svn.digium.com/svn/zaptel/branches/1.2
git-svn-id: http://svn.digium.com/svn/zaptel/branches/1.4@3218 5390a7c7-147a-4af0-8ec9-7488f05a26cb
|
|
Merged revisions 3157 via svnmerge from
http://svn.digium.com/svn/zaptel/branches/1.2
git-svn-id: http://svn.digium.com/svn/zaptel/branches/1.4@3158 5390a7c7-147a-4af0-8ec9-7488f05a26cb
|
|
#11020).
* Don't build metering by default for now.
* And this is xpp rev 4900.
* Make opermode work again.
Merged revisions 3152-3153 via svnmerge from
http://svn.digium.com/svn/zaptel/branches/1.2
git-svn-id: http://svn.digium.com/svn/zaptel/branches/1.4@3154 5390a7c7-147a-4af0-8ec9-7488f05a26cb
|
|
* Zaptel/Hardware perl modules:
- Use sysfs directly. Don't rely on lspci/lsusb.
- Each device has a description and driver name.
- Zaptel::Hardware::drivers() to show the list of required drivers
for this system (see zaptel_drivers).
- zaptel_hardware shows a description and a (suggested?) driver.
* zt_registration sorts by Serial first and only then by connector.
* USB_FW.hex replaces all the USB_11x0.hex .
- Separate USB interface for the management processor.
- Hence fpga_load can now work even with drivers loaded.
* Fix firmware upgrading.
* Fix manual firmware loading while auto-loading.
Merged revisions 3142 via svnmerge from
http://svn.digium.com/svn/zaptel/branches/1.2
git-svn-id: http://svn.digium.com/svn/zaptel/branches/1.4@3143 5390a7c7-147a-4af0-8ec9-7488f05a26cb
|
|
* New firmware protocol version: 2.9 .
* fpga_load: initial clean-ups before interface split.
* genzaptelconf: Don't leave an empty directory behind (4784)
* Increase xpp poll_timeout to 1000ms - useful for CentOS 4 (r4781).
* Fix initialization anoyance: if AB don't answer to polls, don't
waitfor_xpds, and show no waiting XPDs (r4725).
* Disable dtmf_detect by default once again (r4712).
* Don't check twice for asterisk to stop. The second test was done
while Asterisk was still stopping (r4708).
* Support building the kernel with M= instead of with SUBDIRS= , as
used in some newer build systems (r4677).
Merged revisions 3105 via svnmerge from
http://svn.digium.com/svn/zaptel/branches/1.2
git-svn-id: http://svn.digium.com/svn/zaptel/branches/1.4@3106 5390a7c7-147a-4af0-8ec9-7488f05a26cb
|
|
* New firmware protocol version: 2.8 .
* New firmwares fix input ports offhook.
* Cleanup INFO() messages during module loading.
* USB: Receive queue with TASKLETS [r4600]. Controlled by rx_tasklet
parameter to xpp_usb module (can be changed in runtime).
* The pcm_tasklet parameter in xpp module is deprecated:
- Does not actually do anything.
- If set during module loading, shows an ERR() message.
- Also appears in /proc/xpp/sync
* FXS: Hardware DTMF detection by default, can be disabled
by setting dtmf_detection=0 parameter to xpd_fxs.
PCM is muted when DTMF key is pressed.
* zapconf:
- Can now generate users.conf compatible with asterisk-gui.
- Optional command-line arguments denoting which files to generate.
Possible values are 'zaptel', 'zapata' and 'users'.
- Defaults to creating zaptel and zapata.
Merged revisions 3019 via svnmerge from
http://svn.digium.com/svn/zaptel/branches/1.2
git-svn-id: http://svn.digium.com/svn/zaptel/branches/1.4@3020 5390a7c7-147a-4af0-8ec9-7488f05a26cb
|
|
* BRI improvement: an 'nt_keepalive' parameter to xpd_bri forces
a BRI_NT to retry a connection indefinitely (this is our default).
When false it revert to the behaviour in changeset:4415 ("Bezeq like")
* Improvement in DBG macros. The print_dbg parameter is now set of
flags to debug. They are defined in zap_debug.h
* Don't use Astribanks connected to USB1 interfaces
Unless the user set the option usb1=1 for xpp_usb (r4504).
* And some more documentation...
* Include some of our variables in the default zaptel sample file.
Merged revisions 2860 via svnmerge from
https://origsvn.digium.com/svn/zaptel/branches/1.2
git-svn-id: http://svn.digium.com/svn/zaptel/branches/1.4@2866 5390a7c7-147a-4af0-8ec9-7488f05a26cb
|
|
Merged revisions 2818 via svnmerge from
https://origsvn.digium.com/svn/zaptel/branches/1.2
git-svn-id: http://svn.digium.com/svn/zaptel/branches/1.4@2819 5390a7c7-147a-4af0-8ec9-7488f05a26cb
|
|
* Update to zaptel-1.2.18 and zaptel-1.4.3 (r4308 onward)
* Fix a critical race with zaptel synchronization (r4362)
* Added a /proc/xpp/cmds for statistics about command timing (r4360)
* Fix a digit mapping bug with hardware dtmf detection (r4357)
* In xpp/utils/Makefile add perl syntax checks to our scripts (r4337)
* Better USB data error checking (r4336)
* udev rules (xpp.rules) avoid false calls from wrong nodes (r4331)
* Improve hardware detection and reporting in lszaptel,
zaptel_hardware. zapconf is basically functional.
* Leds are blinked synchronously on all Astribanks now (r4262)
* Fix a BRI bug if OPTIMIZE_CHANMUTE was compiled into zaptel (r4258)
(This feature was not yet accepted into official zaptel)
* Removed compile warning about HZ != 1000 (r4218)
* Firmware updates.
* fpga_load now supports USB pathes without zeros (r4211)
* XPD numbers have changed to '<Unit><Subunit>' (r4196)
* Proper support for ZT_VMWI ioctl, if used in zaptel (r4092)
* Fix FXO power denial detection (r4054)
* FXO could accidentally go off-hook with some compilers (r4048)
(From branches/1.2 r2732, r2735)
git-svn-id: http://svn.digium.com/svn/zaptel/branches/1.4@2736 5390a7c7-147a-4af0-8ec9-7488f05a26cb
|
|
* Tested with zaptel-1.2.17.1
* Add D-Channel TX, RX and BAD frames count in /proc/xpp/XBUS-*/XPD-*/bri_info
* Adjust output of xpp_sync script. Pad for 8 port BRI.
* Added a debugging module parport_debug (not compiled by default).
* Added an optional patch to zaptel:
- compiles only if ZAPTEL_SYNC_TICK is defined
- Allow interested driver to register for "sync" notification.
- Does not affect drivers that do not use this feature.
* Added external synchronization feature:
- Only if ZAPTEL_SYNC_TICK feature is compiled in
- Than XPP may be synchronized by another card (e.g: an Astribank
with FXS can be synchronized by a Digium PRI card).
- May be enabled/disabled in runtime via the 'sync_tick_active' module
parameter to the xpp.ko module.
* Fixed a potential bug in D-Channel hexdump printing.
* New visual indications in BRI leds:
- Constant ON RED/GREEN: Shows the port type -- NT/TE.
- Very fast "double blink": Layer1 work, no D-Channel yet.
- Steady blinking (1/2 sec): D-Channel trafic detected.
* xpp_fxloader moved to /usr/share/zaptel .
* adj_clock removed: never really used.
* Now we have Zaptel::Hardware and a sample zaptel_hardware script (not
(installed by default).
* We also have a sample perl zapconf (not installed by default) which
aims at replacing genzaptelconf (sans the modules detection).
git-svn-id: http://svn.digium.com/svn/zaptel/branches/1.4@2536 5390a7c7-147a-4af0-8ec9-7488f05a26cb
|
|
* Protocol no. 2.6: syncing improvements.
* Support for 8-port Astribank BRI.
* Firmware unloading now works:
rmmod xpp_usb; /etc/hotplug/usb/xpp_fxloader reset
* Defaults of kernel parameters are now part of parameter description.
* World-readable kernel parameters.
* No need for extra patch beyond bristuff for Astribank BRI.
* Default poll intervals changed: 500 in BRI and FXO.
* Allow changing FXS polls interval at run time.
* BRI initalization fixed on SUSE (path to logger).
* When using the SUSE zaptel rpm package, set modules_var=ZAPTEL_MODULES in
/etc/sysconfig/zaptel .
* zt_registration not verbose by default.
* xpp_sync warns if FXO is sync slave.
* Fixed genzaptelconf -z (zapscan output emulation).
* PCM fixes.
* Solves "multiple ticks" bug. No need for pcm_tasklets workaround.
git-svn-id: http://svn.digium.com/svn/zaptel/branches/1.4@2477 5390a7c7-147a-4af0-8ec9-7488f05a26cb
|
|
------------------------------------------------------------------------
r2243 | tzafrir | 2007-02-28 02:05:59 +0200 (Wed, 28 Feb 2007) | 4 lines
* xpp rev. 3495: fix a race in the FXO driver of recent weeks.
* Add the Astribank BRI driver (though still needs bristuffed zaptel
to build and thus will not build by default)
------------------------------------------------------------------------
r2239 | tzafrir | 2007-02-27 08:14:18 +0200 (Tue, 27 Feb 2007) | 18 lines
Xorcom rev. 3491:
* Version of xpp modules is set from xpp/.version, rather than "unknown".
* Astribank devices are now initialized in parallel: faster startup
when there are multiple Astribanks.
* Re-added support for the old format of /proc/xpp/sync write:
(echo N 0 > /proc/xpp/sync ) . The new format (SYNC=NN) is preffered.
* Firmware update to fix a PCM issue.
* Fixed a build issue with kernel 2.6.8 .
* Fixed missing initialization in Zaptel::Xpp::Xbus .
* genzaptelconf will now set FXS ports as LS by default. To set them as
KS, use fxs_default_start=ks in /etc/default/zaptel / /etc/sysconfig/zaptel
(Also a workaround for #7755 ).
* Groundwork for sync from zaptel master span: if zaptel is built with
ZAPTEL_SYNC_TIC (see zaptel/team/tzafrir/sync ), xpp will report its
drift from the zaptel sync master.
* USB firmware update: had bad lines checksums (and fxload did not report).
* fpga_load can now better report bad hex file checksum ;-) .
------------------------------------------------------------------------
r2223 | tzafrir | 2007-02-24 03:05:05 +0200 (Sat, 24 Feb 2007) | 3 lines
Add the Zaptel and Zaptel::Xpp perl modules, and some simple
utilities that use them. disabled by default for now.
------------------------------------------------------------------------
r2222 | tzafrir | 2007-02-24 02:55:05 +0200 (Sat, 24 Feb 2007) | 2 lines
Make the xpp/utils/Makefile in 1.2 closer to the one in 1.4 .
git-svn-id: http://svn.digium.com/svn/zaptel/branches/1.4@2244 5390a7c7-147a-4af0-8ec9-7488f05a26cb
|
