configs: Move sample config files into a subdirectory of configs

This moves all samples configs from configs/ to configs/samples. This allows
for additional sets of sample configuration files to be added in the future.

Review: https://reviewboard.asterisk.org/r/3804/


git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@418870 65c4cc65-6c06-0410-ace0-fbb531ad65f3

1 files changed, 0 insertions, 142 deletions

diff --git a/configs/mgcp.conf.sample b/configs/mgcp.conf.sample
deleted file mode 100644
index 7c725bc3d..000000000
--- a/configs/mgcp.conf.sample
+++ /dev/null
@@ -1,142 +0,0 @@
-;
-; MGCP Configuration for Asterisk
-;
-[general]
-;port = 2427
-;bindaddr = 0.0.0.0
-
-; See https://wiki.asterisk.org/wiki/display/AST/IP+Quality+of+Service for a description of these parameters.
-;tos=cs3		; Sets TOS for signaling packets.
-;tos_audio=ef		; Sets TOS for RTP audio packets.
-;cos=3			; Sets 802.1p priority for signaling packets.
-;cos_audio=5		; Sets 802.1p priority for RTP audio packets.
-
-;---------------------- DIGIT TIMEOUTS ----------------------------
-firstdigittimeout = 30000 ; default 16000 = 16s
-gendigittimeout = 10000   ; default  8000 = 8s 
-matchdigittimeout = 5000  ; defaults 3000 = 3s
-
-;------------------------------ JITTER BUFFER CONFIGURATION --------------------------
-; jbenable = yes              ; Enables the use of a jitterbuffer on the receiving side of a
-                              ; MGCP channel. Defaults to "no". An enabled jitterbuffer will
-                              ; be used only if the sending side can create and the receiving
-                              ; side can not accept jitter. The MGCP channel can accept jitter,
-                              ; thus an enabled jitterbuffer on the receive MGCP side will only
-                              ; be used if the sending side can create jitter and jbforce is
-                              ; also set to yes.
-
-; jbforce = no                ; Forces the use of a jitterbuffer on the receive side of a MGCP
-                              ; channel. Defaults to "no".
-
-; jbmaxsize = 200             ; Max length of the jitterbuffer in milliseconds.
-
-; jbresyncthreshold = 1000    ; Jump in the frame timestamps over which the jitterbuffer is
-                              ; resynchronized. Useful to improve the quality of the voice, with
-                              ; big jumps in/broken timestamps, usually sent from exotic devices
-                              ; and programs. Defaults to 1000.
-
-; jbimpl = fixed              ; Jitterbuffer implementation, used on the receiving side of a MGCP
-                              ; channel. Two implementations are currently available - "fixed"
-                              ; (with size always equals to jbmax-size) and "adaptive" (with
-                              ; variable size, actually the new jb of IAX2). Defaults to fixed.
-
-; jbtargetextra = 40          ; This option only affects the jb when 'jbimpl = adaptive' is set.
-                              ; The option represents the number of milliseconds by which the new
-                              ; jitter buffer will pad its size. the default is 40, so without
-                              ; modification, the new jitter buffer will set its size to the jitter
-                              ; value plus 40 milliseconds. increasing this value may help if your
-                              ; network normally has low jitter, but occasionally has spikes.
-
-; jblog = no                  ; Enables jitterbuffer frame logging. Defaults to "no".
-;-----------------------------------------------------------------------------------
-
-;[dlinkgw]
-;host = 192.168.0.64
-;context = default
-;directmedia = no
-;line => aaln/2
-;line => aaln/1
-
-;; The MGCP channel supports the following service codes:
-;; # - Transfer
-;; *67 - Calling Number Delivery Blocking 
-;; *70 - Cancel Call Waiting 
-;; *72 - Call Forwarding Activation 
-;; *73 - Call Forwarding Deactivation 
-;; *78 - Do Not Disturb Activation 
-;; *79 - Do Not Disturb Deactivation 
-;; *8 - Call pick-up
-;
-; known to work with Swissvoice IP10s 
-;[192.168.1.20] 
-;context=local 
-;host=192.168.1.20 
-;callerid = "John Doe" <123> 
-;callgroup=0      ; in the range from 0 to 63
-;pickupgroup=0    ; in the range from 0 to 63
-;nat=no 
-;threewaycalling=yes 
-;transfer=yes     ; transfer requires threewaycalling=yes. Use FLASH to transfer
-;callwaiting=yes  ; this might be a cause of trouble for ip10s
-;cancallforward=yes 
-;line => aaln/1 
-;
-
-;[dph100]
-;
-; Supporting the DPH100M requires defining DLINK_BUGGY_FIRMWARE in
-; chan_mgcp.c in addition to enabling the slowsequence mode due to
-; bugs in the D-Link firmware
-;
-;context=local
-;host=dynamic
-;dtmfmode=none		; DTMF Mode can be 'none', 'rfc2833', or 'inband' or
-			; 'hybrid' which starts in none and moves to inband.  Default is none.
-;slowsequence=yes	; The DPH100M does not follow MGCP standards for sequencing
-;line => aaln/1
-
-; known to work with wave7optics FTTH LMGs
-;[192.168.1.20]
-;accountcode	= 1000		; record this in cdr as account identification for billing
-;amaflags	= billing	; record this in cdr as flagged for 'billing',
-				; 'documentation', or 'omit'
-;context	= local
-;host		= 192.168.1.20
-;wcardep	= aaln/*	; enables wildcard endpoint and sets it to 'aaln/*' 
-				; another common format is '*'
-;callerid 	= "Duane Cox" <123>	; now lets setup line 1 using per endpoint configuration...
-;callwaiting	= no
-;callreturn	= yes
-;cancallforward = yes
-;directmedia	= no
-;transfer	= no
-;dtmfmode	= inband
-;setvar=one=1           ; Set channel variables associated with this incoming line
-;setvar=two=2
-;line => aaln/1			; now lets save this config to line1 aka aaln/1
-;clearvars=all          ; Reset list of variables back to none
-;callerid 	= "Duane Cox" <456>	; now lets setup line 2
-;callwaiting	= no
-;callreturn	= yes
-;cancallforward = yes
-;directmedia	= no
-;transfer	= no
-;dtmfmode	= inband
-;line => aaln/2			; now lets save this config to line2 aka aaln/2
-
-; PacketCable
-;[sbv5121e-mta.test.local]
-;host        = 10.0.1.3
-;callwaiting = 1
-;canreinvite = 1
-;dtmfmode    = rfc2833
-;amaflags    = BILLING
-;ncs         = yes ; Use NCS 1.0 signalling
-;pktcgatealloc = yes ; Allocate DQOS gate on CMTS
-;hangupongateremove = yes ; Hangup the channel if the CMTS close the gate
-;callerid    = 3622622225
-;accountcode = test-3622622225
-;line        = aaln/1
-;callerid    = 3622622226
-;accountcode = test-3622622226
-;line        = aaln/2