Set xpp version to 6056 and reset XPP changelog.

git-svn-id: http://svn.asterisk.org/svn/dahdi/linux/trunk@4784 a0bf4364-ded3-4de4-8d8a-66a801d63aff

1 files changed, 2 insertions, 317 deletions

diff --git a/drivers/dahdi/xpp/Changelog_xpp b/drivers/dahdi/xpp/Changelog_xpp
index 348bc1c..47b1be8 100644
--- a/drivers/dahdi/xpp/Changelog_xpp
+++ b/drivers/dahdi/xpp/Changelog_xpp
@@ -1,317 +1,2 @@
-Tue, 13 May 2008 Oron Peled <oron@actcom.co.il> - xpp.r5744
-  * New firmware protocol version: 30
-  * New numbers for the device types: (e.g. in card_init* scripts)
-    - FXS: 1 (was: 3)
-    - FXO: 2 (was: 4)
-    - BRI: 3 (was: 6 for TE, 7 for NT)
-    - PRI: 4 (was: 9)
-  * Init scripts of FXS and FXO modules are now written in Perl as well
-    (be sure to have File::Basename, e.g: perl-modules in Debian).
-  * calibrate_slics merged into init_card_1_30 .
-  * Each of the init_card_* scripts now runs no more than once per card even
-    if this card represents several XPD's (e.g: quad PRI, BRI). This means
-    maximum of 4 script runs per Astribank.
-  * Zaptel registration now briefly flash all LED's (not just the green ones as
-    before).
-  * Module parameter print_dbg was renamed to debug for consistency with
-    the rest of zaptel.
-  * init_fxo_modes removed: content moved into init_card_2_30, verified
-    at build time.
-  * FXO: removed polling for power-denial. New firmware notifies us.
-  * Code tested with sparse. Most warnings were fixed.
-  * Set ZT_SIG_DACS for the bchans in the PRI and BRI modules to not get
-    ignored by ztscan.
-  * fpga_load: Handle null config_desc we get from some crazy USB controllers.
-  * genzaptelconf: Fix reporting of empty slots in list mode.
-  * xpp_blink can now blink the led of a single analog port.
-  * "slics" has been renamed "chipregs".
-  * Fixed a small typo in fpga_load(8).
-  * Fixed bashism in xpp_fxloader.
-
-Thu, 20 Mar 2008 Oron Peled <oron@actcom.co.il> - xpp.r5566
-  * Build:
-    - Zaptel >= 1.4.9 is migrating to storing kernel stuff in zaptel/kernel/*
-    -  We conditionally use old/new directory scheme:
-       In xpp/Kbuild and xpp/utils/Makefile use ZAP_KERNEL variable, so it's
-       not confused with ZAPTEL_DIR (which appears in zaptel/Makefile as well).
-    - Fix compile warnings on 64 bit systems.
-    - Compile fixes for kernel-2.6.24
-  * UDEV:
-    - /etc/udev/rules.d/xpp.rules now uses XPP_INIT_DIR to find astribank_hook.
-    - astribank_hook: Modify to do nothing. Add some documentation.
-  * Autoconfiguration -- zapconf:
-    - Don't fail zapconf et.al. if no config file was found.
-    - Skip the 'IRQ Missing:' line in /proc/zaptel/nnn for wcte1xp(?).
-    - Add some newer Digium cards to our hardware inventory.
-    - Partially handle cases where the /proc/zaptel strings does not contain
-      info about E1/T1/J1 or NT/TE.
-  * Better SYNC:
-    - Finer tuning of PLL (New firmware).
-    - Change calculation algorithm of sync offset. It now copes better
-      with the variance in USB frame reception timing.
-    - Statistics:
-      . The view of results was moved from /proc/xpp/XBUS-*/summary to
-        a new /sys/bus/astribanks/devices/xbus-*/timing and enhanced.
-      . A new xpp_timing script shows all astribanks.
-      . A new write only /sys/bus/astribanks/devices/xbus-*/cls is
-        used to clear statistics. Eventually, clearing of XBUS related
-        statistics should be done here. One that was migrated is the
-        clearing of 'PCM [TR]X:' numbers currently appearing in
-        /proc/xpp/XBUS-*/summary (they should be moved too later).
-    - Shorten the strings representation sync_mode ("SYNC_MODE_AB" -> "AB")
-      adapted their use in printk and /proc so the text is clear.
-    - Added a command line parameter xpp.disable_pll_sync to stop all
-      adjustments command to AB (calculations still continue as usual).
-  * PRI:
-    - 4 port support
-    - set clocking master span via ztcfg, like other zaptel devices.
-  * FXO:
-    - Fix false hangups in some countries (voltage fluctuations).
-    - Some countries send caller-id before first ring.
-      Added code to handle caller-id PCM pass through according to
-      a new command line parameter (xpd_fxo.caller_id_style).
-    - No longer sends an event on zt_open. See #12160 .
-  * FXS: Re-enable dtmf_detection.
-  * Misc:
-    - Adapt to zaptel-1.4.8 and above ztscan: added fields returend by
-      new ZT_SPANSTAT_V2 ioctl()
-    - Document sysfs and waitfor_xpds.
-    - Miscelaneous optimizations and bugfixes.
-    - Remove deprecated pcm_tasklet parameter. The rx_tasklet parameter has
-      replaced it a long time ago.
-    - Add RX_CMD counter to /proc/xpp/XBUS-*/summary
-    - Unclutter some of the usb disconnect messages.
-    - xpp_usb: minor preformance improvements in receive.
-      Expose the number of pending receive URB's in /proc/xpp/XBUS-*/xpp_usb
-Thu Jan 10 2008 Oron Peled <oron.peled@xorcom.com> - xpp.r5254
-  * Improved polarity reversal hangups in FXO (r5194).
-    Fixed false detection of polarity reversals.
-  * Optimize xframe allocation, by not zeroing the whole
-    memory (in get_xframe()).
-  * Fixed erronous error message that appeared sometimes
-    from fpga_load during USB renumeration.
-  * Zaptel::Chans now provides battery() reporting for some FXO
-    channels (Astribank FXO and wcfxo).
-
-Tue Dec 25 2007 Tzafrir Cohen <tzafrir.cohen@xorcom.com> - xpp.r5179
-  * xpd_pri: Basically ready.
-  * PCM synchronization changes:
-    - Each Astribank unit ticks independently. Each with its own PLL.
-    - HOST synchronization is gone. Loading of xpp will no longer cause
-      useless 250 ticks per second if you have no Astribank.
-    - Synchronization from the zaptel sync master requires setting
-      ZAPTEL as sync source (xpp_sync ZAPTEL).
-  * rx_tasklet is now a parameter of the module xpp, rather than of xpp_usb.
-  * New FPGA firmware: 5128 (1151) / 5122 (1141, 1131):
-    - Fixes synchronization issues.
-    - PRI module: E1/T1 should now work.
-  * perl module and utilities:
-    - Modules no longer magically scan system on initialization.
-    - Scanning is by calling explicit methods.
-    - "Serial" has been renamed "Label". It is basically unique, but 
-      should be modifieble.
-    - Some basic documentation of zaptel perl modules.
-  * Default sort order of zt_registration is back to SORT_CONNCTOR.
-  * zt_registration proc file now shows the number of span registered to 
-    if registered. Try: grep . /proc/xpp/XBUS-*/XPD-*/zt_registration
-  * genzaptelconf: Allow using a custom command instead of
-    /etc/init.d/asterisk to start/stop asterisk.
-  * Fixed the typo "Slagish".
-
-Wed Nov 14 2007 Tzafrir Cohen <tzafrir.cohen@xorcom.com> - xpp.r5010
-  * Fix a deadlock spotted on some SMP installations.
-  * increase FXS ring detect debounce interval.
-  * Improve (reduce) signal attenuation on FXO ports.
-  * zaptel-perl: further fixes to handling of empty slots.
-
-Wed Oct  3 2007 Tzafrir Cohen <tzafrir.cohen@xorcom.com> - xpp.r4900
-  * Zaptel/Hardware perl modules: 
-    - Use sysfs directly. Don't rely on lspci/lsusb.
-    - Each device has a description and driver name.
-    - Zaptel::Hardware::drivers() to show the list of required drivers
-      for this system (see zaptel_drivers).
-    - zaptel_hardware shows a description and a (suggested?) driver.
-  * zt_registration sorts by Serial first and only then by connector.
-  * USB_FW.hex replaces all the USB_11x0.hex .
-    - Separate USB interface for the management processor.
-    - Hence fpga_load can now work even with drivers loaded.
-  * Fix firmware upgrading.
-  * Fix manual firmware loading while auto-loading.
-  * Fix opermode parameter for FXO initialization (broken in r4648).
-
-Wed Oct  3 2007 Oron Peled <oron@actcom.co.il> - xpp.r4786
-  * New firmware protocol version: 2.9 .
-  * fpga_load: initial clean-ups before interface split.
-  * genzaptelconf: Don't leave an empty directory behind (4784)
-  * Increase xpp poll_timeout to 1000ms - useful for CentOS 4 (r4781).
-  * Fix initialization anoyance: if AB don't answer to polls, don't
-    waitfor_xpds, and show no waiting XPDs (r4725).
-  * Disable dtmf_detection by default once again (r4712).
-  * Don't check twice for asterisk to stop. The second test was done 
-    while Asterisk was still stopping (r4708).
-  * Support building the kernel with M= instead of with SUBDIRS= , as
-    used in some newer build systems (r4677).
-
-Tue Sep 11 2007 Oron Peled <oron@actcom.co.il> - xpp.r4648
-  * New firmware protocol version: 2.8 .
-  * Cleanup INFO() messages during module loading.
-
-  * USB: Receive queue with TASKLETS [r4600].  Controlled by rx_tasklet
-    parameter to xpp_usb module (can be changed in runtime).
-  * The pcm_tasklet parameter in xpp module is deprecated:
-    - Does not actually do anything.
-    - If set during module loading, shows an ERR() message.
-    - Also appears in /proc/xpp/sync
-
-  * FXS: Hardware DTMF detection by default, can be disabled
-    by setting dtmf_detection=0 parameter to xpd_fxs.
-    PCM is muted when DTMF key is pressed.
-
-  * zapconf:
-    - Can now generate users.conf compatible with asterisk-gui.
-    - Optional command-line arguments denoting which files to generate.
-      Possible values are 'zaptel', 'zapata' and 'users'.
-    - Defaults to creating zaptel and zapata.
-
-  * Update to zaptel-1.4.5.1, zaptel-1.2.20.1
-  * Fix building on kernel 2.6.23rc1, from Axel Thimm.
-  * New firmware to fix FXS leds irregularities.
-  * Less noise at build time - don't echo version, test compile ony once.
-  * zapconf can generate users.conf snippets.
-
-Thu Aug 16 2007 Tzafrir Cohen <tzafrir.cohen@xorcom.com> - xpp.r4515
-  * Don't use Astribanks connected to USB1 interfaces
-    Unless the user set the option usb1=1 for xpp_usb (r4504).
-  * README.Astribank can now be generated from the makefile (r4503).
-  * Demote the messages about PCM in non-PCM from notice to debug (r4501).
-  * Fix sample BRI zapata.conf: NT instead of TE (r4498).
-  * Disable FXS hardware DTMF detection by default (r4492).
-  * Extra Zaptel PCI IDs (from Philipp Kempgen) (r4466).
-
-Thu Aug  2 2007 Oron Peled <oron@actcom.co.il> - xpp.r4464
-  * Jump to zaptel-1.2.19 and zaptel-1.4.4 (with/without bristuff)
-  * BRI improvement: an 'nt_keepalive' parameter to xpd_bri forces
-    a BRI_NT to retry a connection indefinitely (this is our default).
-    When false it revert to the behaviour in changeset:4415 ("Bezeq like")
-  * Improvement in DBG macros. The print_dbg parameter is now set of
-    flags to debug. They are defined in zap_debug.h
-  * PRI configuration improvements (r4462):
-    - Hardcoded default (in init_card_9_26) is TE.
-    - The variable XPP_PRI_SETUP (in /etc/default/zaptel) may config
-      all PRI ports or some of them as we wish. Full docs are in
-      the utils/example_default_zaptel.
-  * PRI D-channel indication: Similar to BRI (r4464).
-
-Thu Jul 30 2007 Oron Peled <oron@actcom.co.il> - xpp.r4415
-  * Show Astribank 6+2 as 6/2 channels and not 8/8 channels.
-    - Added as a "subtype" to the device type (r4391).
-  * Fixed a panic in BRI span shutdown method (r4393).
-  * Changes to debug macros.
-  * Add proper sysfs support (r4406)
-    - A bus on whuch all of the Astribanks reside.
-    - Replaces useless sysfs code that existed in the module.
-    - Currently used to set the sync source automatically at device
-      adition / removal.
-  * BRI: We do need the T1 timer in NT. If it gets into G2 state (rr4407).
-
-Thu Jul 12 2007 Oron Peled <oron@actcom.co.il> - xpp.r4372
-  * Update to zaptel-1.2.18 and zaptel-1.4.3 (r4308 onward)
-  * Fix a critical race with zaptel synchronization (r4362)
-  * Added a /proc/xpp/cmds for statistics about command timing (r4360)
-  * Fix a digit mapping bug with hardware dtmf detection (r4357)
-  * In xpp/utils/Makefile add perl syntax checks to our scripts (r4337)
-  * Better USB data error checking (r4336)
-  * udev rules (xpp.rules) avoid false calls from wrong nodes (r4331)
-  * Improve hardware detection and reporting in lszaptel,
-    zaptel_hardware. zapconf is basically functional.
-  * Leds are blinked synchronously on all Astribanks now (r4262)
-  * Fix a BRI bug if OPTIMIZE_CHANMUTE was compiled into zaptel (r4258)
-    (This feature was not yet accepted into official zaptel)
-  * Removed compile warning about HZ != 1000 (r4218)
-  * Firmware updates.
-  * xpd_pri: the PRI module
-  * fpga_load now supports USB pathes without zeros (r4211)
-  * XPD numbers have changed to '<Unit><Subunit>' (r4196)
-  * Proper support for ZT_VMWI ioctl, if used in zaptel (r4092)
-  * Fix FXO power denial detection (r4054)
-  * FXO could accidentally go off-hook with some compilers (r4048)
-
-Tue May  1 2007 Oron Peled <oron@actcom.co.il> - xpp.r3898
-  * Tested with zaptel-1.2.17.1
-  * Add D-Channel TX, RX and BAD frames count in /proc/xpp/XBUS-*/XPD-*/bri_info
-  * Adjust output of xpp_sync script. Pad for 8 port BRI.
-  * Added a debugging module parport_debug (not compiled by default).
-  * Added an optional patch to zaptel:
-      - compiles only if ZAPTEL_SYNC_TICK is defined
-      - Allow interested driver to register for "sync" notification.
-      - Does not affect drivers that do not use this feature.
-  * Added external synchronization feature:
-      - Only if ZAPTEL_SYNC_TICK feature is compiled in
-      - Than XPP may be synchronized by another card (e.g: an Astribank
-        with FXS can be synchronized by a Digium PRI card).
-      - May be enabled/disabled in runtime via the 'sync_tick_active' module
-        parameter to the xpp.ko module.
-  * Fixed a potential bug in D-Channel hexdump printing.
-  * New visual indications in BRI leds:
-      - Constant ON RED/GREEN: Shows the port type -- NT/TE.
-      - Very fast "double blink": Layer1 work, no D-Channel yet. 
-      - Steady blinking (1/2 sec): D-Channel trafic detected. 
-  * xpp_fxloader moved to /usr/share/zaptel .
-  * adj_clock removed: never really used.
-
-Thu, 19 Apr 2007 Tzafrir Cohen <tzafrir.cohen@xorcom.com> - xpp.r3814
-  * No need for extra patch beyond bristuff for Astribank BRI.
-  * Protocol no. 2.6: syncing improvements.
-  * Default poll intervals changed: 500 in BRI and FXO.
-  * Allow changing FXS polls interval at run time.
-  * BRI initalization fixed on SUSE (path to logger).
-  * When using the SUSE zaptel rpm package, set modules_var=ZAPTEL_MODULES in
-    /etc/sysconfig/zaptel .
-  * zt_registration not verbose by default.
-  * xpp_sync warns if FXO is sync slave.
-  * Extra PCM metrics data in /proc/xpp/XBUS-NN/summary .
-  * Extra USB metrics data in /proc/xpp/XBUS-NN/usb_info .
-
-Wed, 11 Apr 2007 Tzafrir Cohen <tzafrir.cohen@xorcom.com> - xpp.r3768
-  * Removed "go away" notice and solved sync of a restarted device.
-  * Resetting firmware: rmmod xpp_usb; /etc/hotplug/usb/xpp_fxloader reset
-  * Perl modules use strict.
-  * genzaptelconf -F will not generate zapata configuration for NT spans.
-  * genzaptelconf uses perl utilities to start.
-  * Initial support for 2nd XHFC (BRI) chip.
-
-Sun,  1 Apr 2007 Tzafrir Cohen <tzafrir.cohen@xorcom.com> - xpp.r3712
-  * New protocol version (2.5).
-  * Luckily firmware unloading now works.
-  * Solves "multiple ticks" bug. No need for pcm_tasklets workaround.
-  * genzaptelconf -z will generate zapscan.conf for the asterisk-gui.
-  * Fixed hardware detection for the BRI.
-
-Wed, 14 Mar 2007 Tzafrir Cohen <tzafrir.cohen@xorcom.com> - xpp.r3608
-  * Initial verssion of firmware unloading.
-  * PCM bugfixes.
-  * Defaults of kernel parameters are now part of parameter description.
-  * Removed zaptel sync code for now.
-  * genzaptelconf will detect vzaphfc.
-  * genzaptelconf defaults to ptmp for BRI.
-  * Documentation updates.
-
-Mon, 26 Feb 2007 Tzafrir Cohen <tzafrir.cohen@xorcom.com> - xpp.r3517
-  * genzaptelconf now uses ls for FXS lines by default .
-  * World-readable kernel parameters.
-
-Thu, 22 Feb 2007 Tzafrir Cohen <tzafrir.cohen@xorcom.com> - xpp.r3440
-  * /proc/xpp/sync: 'm 0' is, while depracated, can still be used.
-  * New firmware with PCM improvements.
-  * Improvements to the xpp helper scripts.
-  * Bug fixes.
-  * zaptel/perl is now installed by xpp/utils/Makefile.
-
-Wed, 14 Feb 2007 Tzafrir Cohen <tzafrir.cohen@xorcom.com> - xpp.r3365
-  * Kewlstart support on the FXS ports (already existed on the FXO ports).
-  * The format of /proc/xpp/sync has changed (still self-documented).
-  * Better notification of FXS lines that were off-hook on registration time.
-  * Parallel polling of Astribanks (faster startup when there are multiple
-    devices)
-  * zconf: scripts and perl modules to automate the work with Zaptel and the
-    Astribank. Current scripts: zt_registration, xpp_sync.
+Thu, Aug 14 2008 Oron Peled <oron@actcom.co.il> - xpp.r6056
+  * First DAHDI-linux release.