Age | Commit message (Collapse) | Author |
|
* In MPP serial protocol add support for SER_STAT_GET command
* Use it to query firmware for:
- FPGA build configuration number (1 - old main, 2 - new main)
- Watchdog timer state bit (ready/expired)
- XPD Alive timer state bit (yes/no)
* Also cleanup the code in mpps_card_info():
- In all MPP serial commands the send/recive buffers must
have identical size
- No need to alias struct pointers to byte-buffers, just use
the structs themselves as buffers.
Signed-off-by: Oron Peled <oron.peled@xorcom.com>
Acked-by: Tzafrir Cohen <tzafrir.cohen@xorcom.com>
git-svn-id: http://svn.asterisk.org/svn/dahdi/tools/trunk@10501 a0bf4364-ded3-4de4-8d8a-66a801d63aff
|
|
* Extrainfo field contains junk data
* Caused by:
- The field is initialized to 0xFF values
- There was no null termination (and no room to add it)
* New code:
- Ensure that show_extrainfo() have null termination even if EEPROM
field is full.
- Replace trailing 0xFF characters with '\0' when reading this field
- Since our default burned EEPROM contain Extrainfo field full of
0xFF characters, this would make them look as null filled.
Internal Issue-Id: #1341
Signed-off-by: Oron Peled <oron.peled@xorcom.com>
Acked-by: Tzafrir Cohen <tzafrir.cohen@xorcom.com>
git-svn-id: http://svn.asterisk.org/svn/dahdi/tools/trunk@10491 a0bf4364-ded3-4de4-8d8a-66a801d63aff
|
|
* Move most of the USB access code from xpp/ to xpp/xtalk/ .
* astribank_tool and such tools can now use a shorter -D mmm/nnn rather
than a full path.
Signed-off-by: Oron Peled <oron.peled@xorcom.com>
Acked-by: Tzafrir Cohen <tzafrir.cohen@xorcom.com>
git-svn-id: http://svn.asterisk.org/svn/dahdi/tools/trunk@9825 a0bf4364-ded3-4de4-8d8a-66a801d63aff
|
|
* New firmware loading protocol
- Older one (1.3) is still supported for now
* Support loading firmwares from Astribanks with a minimal firmware
(1163)
* astribank_tool -Q: always query, regardless of verbosity level
xpp rev: up to 7559
git-svn-id: http://svn.asterisk.org/svn/dahdi/tools/trunk@7609 a0bf4364-ded3-4de4-8d8a-66a801d63aff
|
|
* New USB firmware loading mechanism.
- Incompatible with previous one: upgrade using fxload or hard reset
- astribank_hexload is the new low-level loading tool
- fpga_load remains for backward compatibility.
- xpp/astribank_upgrade: automate upgrading using fxload
* Much enhanced control protocol ("MPP")
- astribank_tool is the low-level tool for that.
* Support for the TwinStar (dual USB port)
- Managed through astribank_tool
- Wrapper perl modules and scripts provided
* Allow explicit ordering of Astribanks
- /etc/dahdi/xpp_order - explicit order of Astribanks on the system
- The default sorter is now to use those and fall back to connectors
(previous default).
- An option to dahdi_registration to change sorting.
git-svn-id: http://svn.asterisk.org/svn/dahdi/tools/trunk@6313 a0bf4364-ded3-4de4-8d8a-66a801d63aff
|