diff options
author | tzafrir <tzafrir@5390a7c7-147a-4af0-8ec9-7488f05a26cb> | 2009-05-27 10:01:24 +0000 |
---|---|---|
committer | tzafrir <tzafrir@5390a7c7-147a-4af0-8ec9-7488f05a26cb> | 2009-05-27 10:01:24 +0000 |
commit | 18c6813f2c788b603dab363b9138d65d24252167 (patch) | |
tree | 92402484268f2bc1d5e4e55f7321b9204ad47c5f /kernel/xpp/utils/astribank_tool.8 | |
parent | 2a73224819e867eaf56371d6055e2ca4d36396b6 (diff) |
Big dump of newer xpp code.
For finer details and separate commits, you are advised to look into the
commit log of dahdi-{linux,tools}.
xpp.r7150
* 116x Astribanks:
- Support for the TwinStar capability and for FXO and (BRI|PRI) on
same device.
- New control protocol ("MPP").
- astribank_hextool - a low-level firmware loading tool instead of
fpga_load .
- astribank_tool - Other MPP activities .
- Can still reset (but just that) through older protocol.
- astribank_hexload is required for loading FPGA firmware for USB_FW.hex
rev > 6885.
- USB_FW rev. 7071 .
- More modular FPGA firmware (1161 only).
- FPGA_1161.hex rev. 7131. PIC_TYPE_* rev. 7107.
- software-settings of some capabilities with astribank_allow .
* XPP:
- init_card_* script are less verbose.
- Reduced rate of "Is a DAHDI sync master" message.
- Replace member bus_id with dev_name() and set_dev_name() for
building with 2.6.30.
- Conditionally remove 'owner' property of procfs was dropped in 2.6.30.
- astribank_hook now enabled by default.
- Has an optional hook for TwinStar.
* BRI:
- hardhdlc support: The bri_dchan patch is no longer needed.
- If bri_dchan patch applied: old code is used, and "dchan" is used.
- If not: new code and "hardhdlc" is used.
- zapconf will generate the right configuration, depending on the new
sysfs driver attribute bri_hardhdlc, but default to "dchan" as
before if not explicitly told.
- Bugfix: explicitly turn off leds on startup.
* FXS:
- Initialization and calibration fixes.
- Notify the user just one about wrong VMWI config
* Dahdi-perl:
- Fix detection of empty slots in wctdm.
- Fix working with ethmf's extra file in /proc/zaptel
- Improved detection of Rhino cards.
- dahdi_genconf's generated text better explains files are generated.
- /etc/xpp_order - allow specifiying an explicit order for
Astribanks to register with Zaptel.
- Dahdi::Xpp::Mpp - A wrapper around astribank_tool .
* dahdi.init:
- A separate waitfor_xpds script. May now have a wait-loop in
some cases.
- xpp_sync needs to only be called after dahdi_cfg .
(for the PRI module).
git-svn-id: http://svn.digium.com/svn/zaptel/branches/1.4@4641 5390a7c7-147a-4af0-8ec9-7488f05a26cb
Diffstat (limited to 'kernel/xpp/utils/astribank_tool.8')
-rw-r--r-- | kernel/xpp/utils/astribank_tool.8 | 79 |
1 files changed, 79 insertions, 0 deletions
diff --git a/kernel/xpp/utils/astribank_tool.8 b/kernel/xpp/utils/astribank_tool.8 new file mode 100644 index 0000000..0507ad5 --- /dev/null +++ b/kernel/xpp/utils/astribank_tool.8 @@ -0,0 +1,79 @@ +.TH "ASTRIBANK_TOOL" "8" "29 March 2009" "" "" + +.SH NAME +astribank_tool \- Xorcom Astribank (xpp) control tool +.SH SYNOPSIS +.B astribank_tool -D \fIdevice-path\fR [ options ] + +.B astribank_tool [-h] + +.SH DESCRIPTION +.B astribank_tool +is a tool to control the USB-level functionality of an Astribank. + +.SH OPTIONS +.B -D +.I device-path +.RS +Required. The device to read from/write to. On modern UDEV-based system +this is usually /dev/bus/usb/\fIbus_num\fR/\fIdevice_num\fR, +where \fIbus_num\fR and \fIdevice_num\fR are the first two numbers in the +output of lsusb(8). +On older systems that use usbfs, it is usually +/proc/bus/usb/\fIbus_num\fR/\fIdevice_num\fR. +.RE + +.B -p \fInum\fR +.RS +Set the TwinStar port number. Either 0 or 1. + +(TODO: explain). +.RE + +.B -r \fItype\fR +.RS +Reset the Astribank and renumerate its USB connection to power on product ID. + +Tyep can be: \fBhalf\fR or \fBfull\fR. + +(TODO: explain those). +.RE + +.B -w 0|1 +.RS +Enable (1) or disable (0) the TwinStar watchdog. When enabled, the +Astribank will jump to the second port if this system is "not working" +and the system on the second port is available. +.RE + +.B -n +.RS +Renumerate the Astribank product number (e.g: from 1161 to 1162). +.RE + +.B -v +.RS +Increase verbosity. May be used multiple times. +.RE + +.B -d \fImask\fR +.RS +Set debug mask to \fImask\fR. Default is 0, 0xFF is "everything". +.RE + +.B -h +.RS +Displays usage message. +.RE + +.SH SEE ALSO +fxload(8), lsusb(8), astribank_hextool(8) + +.SH AUTHOR +This manual page was written by Tzafrir Cohen <tzafrir.cohen@xorcom.com> . +Permission is granted to copy, distribute and/or modify this document under +the terms of the GNU General Public License, Version 2 any +later version published by the Free Software Foundation. + +On Debian systems, the complete text of the GNU General Public +License can be found in /usr/share/common-licenses/GPL. |