diff options
author | tzafrir <tzafrir@5390a7c7-147a-4af0-8ec9-7488f05a26cb> | 2009-05-27 10:01:24 +0000 |
---|---|---|
committer | tzafrir <tzafrir@5390a7c7-147a-4af0-8ec9-7488f05a26cb> | 2009-05-27 10:01:24 +0000 |
commit | 18c6813f2c788b603dab363b9138d65d24252167 (patch) | |
tree | 92402484268f2bc1d5e4e55f7321b9204ad47c5f /kernel/xpp/utils/astribank_tool.c | |
parent | 2a73224819e867eaf56371d6055e2ca4d36396b6 (diff) |
Big dump of newer xpp code.
For finer details and separate commits, you are advised to look into the
commit log of dahdi-{linux,tools}.
xpp.r7150
* 116x Astribanks:
- Support for the TwinStar capability and for FXO and (BRI|PRI) on
same device.
- New control protocol ("MPP").
- astribank_hextool - a low-level firmware loading tool instead of
fpga_load .
- astribank_tool - Other MPP activities .
- Can still reset (but just that) through older protocol.
- astribank_hexload is required for loading FPGA firmware for USB_FW.hex
rev > 6885.
- USB_FW rev. 7071 .
- More modular FPGA firmware (1161 only).
- FPGA_1161.hex rev. 7131. PIC_TYPE_* rev. 7107.
- software-settings of some capabilities with astribank_allow .
* XPP:
- init_card_* script are less verbose.
- Reduced rate of "Is a DAHDI sync master" message.
- Replace member bus_id with dev_name() and set_dev_name() for
building with 2.6.30.
- Conditionally remove 'owner' property of procfs was dropped in 2.6.30.
- astribank_hook now enabled by default.
- Has an optional hook for TwinStar.
* BRI:
- hardhdlc support: The bri_dchan patch is no longer needed.
- If bri_dchan patch applied: old code is used, and "dchan" is used.
- If not: new code and "hardhdlc" is used.
- zapconf will generate the right configuration, depending on the new
sysfs driver attribute bri_hardhdlc, but default to "dchan" as
before if not explicitly told.
- Bugfix: explicitly turn off leds on startup.
* FXS:
- Initialization and calibration fixes.
- Notify the user just one about wrong VMWI config
* Dahdi-perl:
- Fix detection of empty slots in wctdm.
- Fix working with ethmf's extra file in /proc/zaptel
- Improved detection of Rhino cards.
- dahdi_genconf's generated text better explains files are generated.
- /etc/xpp_order - allow specifiying an explicit order for
Astribanks to register with Zaptel.
- Dahdi::Xpp::Mpp - A wrapper around astribank_tool .
* dahdi.init:
- A separate waitfor_xpds script. May now have a wait-loop in
some cases.
- xpp_sync needs to only be called after dahdi_cfg .
(for the PRI module).
git-svn-id: http://svn.digium.com/svn/zaptel/branches/1.4@4641 5390a7c7-147a-4af0-8ec9-7488f05a26cb
Diffstat (limited to 'kernel/xpp/utils/astribank_tool.c')
-rw-r--r-- | kernel/xpp/utils/astribank_tool.c | 202 |
1 files changed, 202 insertions, 0 deletions
diff --git a/kernel/xpp/utils/astribank_tool.c b/kernel/xpp/utils/astribank_tool.c new file mode 100644 index 0000000..d5ba667 --- /dev/null +++ b/kernel/xpp/utils/astribank_tool.c @@ -0,0 +1,202 @@ +/* + * Written by Oron Peled <oron@actcom.co.il> + * Copyright (C) 2008, Xorcom + * + * All rights reserved. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + * + */ + +#include <stdio.h> +#include <string.h> +#include <stdlib.h> +#include <errno.h> +#include <assert.h> +#include <getopt.h> +#include <arpa/inet.h> +#include "mpp_funcs.h" +#include "debug.h" + +#define DBG_MASK 0x80 + +static char *progname; + +static void usage() +{ + fprintf(stderr, "Usage: %s [options...] -D {/proc/bus/usb|/dev/bus/usb}/<bus>/<dev>\n", progname); + fprintf(stderr, "\tOptions: {-n|-r kind}\n"); + fprintf(stderr, "\t\t[-n] # Renumerate device\n"); + fprintf(stderr, "\t\t[-r kind] # Reset: kind = {half|full}\n"); + fprintf(stderr, "\t\t[-p port] # TwinStar: USB port number [0, 1]\n"); + fprintf(stderr, "\t\t[-w (0|1)] # TwinStar: Watchdog off or on guard\n"); + fprintf(stderr, "\t\t[-v] # Increase verbosity\n"); + fprintf(stderr, "\t\t[-d mask] # Debug mask (0xFF for everything)\n"); + exit(1); +} + +static int reset_kind(const char *arg) +{ + static const struct { + const char *name; + int type_code; + } reset_kinds[] = { + { "half", 0 }, + { "full", 1 }, + }; + int i; + + for(i = 0; i < sizeof(reset_kinds)/sizeof(reset_kinds[0]); i++) { + if(strcasecmp(reset_kinds[i].name, arg) == 0) + return reset_kinds[i].type_code; + } + ERR("Uknown reset kind '%s'\n", arg); + return -1; +} + + +static int show_hardware(struct astribank_device *astribank) +{ + uint8_t unit; + uint8_t card_status; + uint8_t card_type; + int ret; + struct eeprom_table eeprom_table; + struct capabilities capabilities; + struct extrainfo extrainfo; + + show_astribank_info(astribank); + ret = mpp_caps_get(astribank, &eeprom_table, &capabilities, NULL); + if(ret < 0) + return ret; + show_eeprom(&eeprom_table, stdout); + show_astribank_status(astribank, stdout); + if(astribank->eeprom_type == EEPROM_TYPE_LARGE) { + show_capabilities(&capabilities, stdout); + if(STATUS_FPGA_LOADED(astribank->status)) { + for(unit = 0; unit < 4; unit++) { + ret = mpps_card_info(astribank, unit, &card_type, &card_status); + if(ret < 0) + return ret; + printf("CARD %d: type=%x.%x %s\n", unit, + ((card_type >> 4) & 0xF), (card_type & 0xF), + ((card_status & 0x1) ? "PIC" : "NOPIC")); + } + } + ret = mpp_extrainfo_get(astribank, &extrainfo); + if(ret < 0) + return ret; + show_extrainfo(&extrainfo, stdout); + if(CAP_EXTRA_TWINSTAR(&capabilities)) { + twinstar_show(astribank, stdout); + } + } + return 0; +} + +int main(int argc, char *argv[]) +{ + char *devpath = NULL; + struct astribank_device *astribank; + const char options[] = "vd:D:nr:p:w:"; + int opt_renumerate = 0; + char *opt_port = NULL; + char *opt_watchdog = NULL; + char *opt_reset = NULL; + int tws_portnum; + int full_reset; + int ret; + + progname = argv[0]; + while (1) { + int c; + + c = getopt (argc, argv, options); + if (c == -1) + break; + + switch (c) { + case 'D': + devpath = optarg; + break; + case 'n': + opt_renumerate++; + break; + case 'p': + opt_port = optarg; + break; + case 'w': + opt_watchdog = optarg; + break; + case 'r': + opt_reset = optarg; + if((full_reset = reset_kind(opt_reset)) < 0) + usage(); + break; + case 'v': + verbose++; + break; + case 'd': + debug_mask = strtoul(optarg, NULL, 0); + break; + case 'h': + default: + ERR("Unknown option '%c'\n", c); + usage(); + } + } + if(!devpath) { + ERR("Missing device path\n"); + usage(); + } + DBG("Startup %s\n", devpath); + if((astribank = mpp_init(devpath)) == NULL) { + ERR("Failed initializing MPP\n"); + return 1; + } + show_hardware(astribank); + if(opt_reset) { + if((ret = mpp_reset(astribank, full_reset)) < 0) { + ERR("%s Reseting astribank failed: %d\n", + (full_reset) ? "Full" : "Half", ret); + } + } else if(opt_renumerate) { + if((ret = mpp_renumerate(astribank)) < 0) { + ERR("Renumerating astribank failed: %d\n", ret); + } + } else if(opt_watchdog) { + int watchdogstate = strtoul(opt_watchdog, NULL, 0); + + INFO("TWINSTAR: Setting watchdog %s-guard\n", + (watchdogstate) ? "on" : "off"); + if((ret = mpp_tws_setwatchdog(astribank, watchdogstate)) < 0) { + ERR("Failed to set watchdog to %d\n", watchdogstate); + return 1; + } + } else if(opt_port) { + int new_portnum = strtoul(opt_port, NULL, 0); + char *msg = (new_portnum == tws_portnum) + ? " Same same, never mind..." + : ""; + + INFO("TWINSTAR: Setting portnum to %d.%s\n", new_portnum, msg); + if((ret = mpp_tws_setportnum(astribank, new_portnum)) < 0) { + ERR("Failed to set USB portnum to %d\n", new_portnum); + return 1; + } + } + mpp_exit(astribank); + return 0; +} |