Big dump of newer xpp code.

For finer details and separate commits, you are advised to look into the
commit log of dahdi-{linux,tools}.

xpp.r7150

* 116x Astribanks:
 - Support for the TwinStar capability and for FXO and (BRI|PRI) on
   same device.
 - New control protocol ("MPP").
 - astribank_hextool - a low-level firmware loading tool instead of
   fpga_load .
 - astribank_tool - Other MPP activities .
 - Can still reset (but just that) through older protocol.
 - astribank_hexload is required for loading FPGA firmware for USB_FW.hex 
   rev > 6885.
 - USB_FW rev. 7071 . 
 - More modular FPGA firmware (1161 only).
 - FPGA_1161.hex rev. 7131. PIC_TYPE_* rev. 7107.
 - software-settings of some capabilities with astribank_allow .

* XPP:
  - init_card_* script are less verbose.
  - Reduced rate of "Is a DAHDI sync master" message.
  - Replace member bus_id with dev_name() and set_dev_name() for
    building with 2.6.30.
  - Conditionally remove 'owner' property of procfs was dropped in 2.6.30.
  - astribank_hook now enabled by default.
  - Has an optional hook for TwinStar.

* BRI:
  - hardhdlc support: The bri_dchan patch is no longer needed.
  - If bri_dchan patch applied: old code is used, and "dchan" is used.
  - If not: new code and "hardhdlc" is used.
  - zapconf will generate the right configuration, depending on the new
    sysfs driver attribute bri_hardhdlc, but default to "dchan" as
    before if not explicitly told.
  - Bugfix: explicitly turn off leds on startup.

* FXS:
  - Initialization and calibration fixes.
  - Notify the user just one about wrong VMWI config

* Dahdi-perl:
  - Fix detection of empty slots in wctdm.
  - Fix working with ethmf's extra file in /proc/zaptel
  - Improved detection of Rhino cards.
  - dahdi_genconf's generated text better explains files are generated.
  - /etc/xpp_order - allow specifiying an explicit order for
    Astribanks to register with Zaptel.
  - Dahdi::Xpp::Mpp - A wrapper around astribank_tool .

* dahdi.init:
  - A separate waitfor_xpds script. May now have a wait-loop in
    some cases.
  - xpp_sync needs to only be called after dahdi_cfg .
    (for the PRI module).



git-svn-id: http://svn.digium.com/svn/zaptel/branches/1.4@4641 5390a7c7-147a-4af0-8ec9-7488f05a26cb

1 files changed, 102 insertions, 0 deletions

diff --git a/kernel/xpp/utils/astribank_usb.h b/kernel/xpp/utils/astribank_usb.h
new file mode 100644
index 0000000..6f9a429
--- /dev/null
+++ b/kernel/xpp/utils/astribank_usb.h
@@ -0,0 +1,102 @@
+#ifndef	ASTRIBANK_USB_H
+#define	ASTRIBANK_USB_H
+/*
+ * Written by Oron Peled <oron@actcom.co.il>
+ * Copyright (C) 2008, Xorcom
+ *
+ * All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ *
+ */
+
+#include <stdio.h>
+#include <usb.h>
+#include "mpp.h"
+
+/*
+ * Astribank handling
+ */
+
+#define	PACKET_SIZE	512
+
+/* USB Endpoints */
+#define	MP_EP_OUT	0x04	/* Managment processor */
+#define	MP_EP_IN	0x88	/* Managment processor */
+
+#define	XPP_EP_OUT	0x02	/* XPP */
+#define	XPP_EP_IN	0x86	/* XPP */
+
+/* USB firmware types */
+#define	USB_11xx	0
+#define	USB_FIRMWARE_II	1
+#define	USB_PIC		2
+
+struct interface_type {
+	int	type_code;
+	int	num_interfaces;
+	int	my_interface_num;
+	int	num_endpoints;
+	int	my_ep_out;
+	int	my_ep_in;
+	char	*name;
+	int	endpoints[4];	/* for matching */
+};
+
+enum eeprom_burn_state {
+	BURN_STATE_NONE		= 0,
+	BURN_STATE_STARTED	= 1,
+	BURN_STATE_ENDED	= 2,
+	BURN_STATE_FAILED	= 3,
+};
+
+struct astribank_device {
+	struct usb_device	*dev;
+	usb_dev_handle		*handle;
+	int			my_interface_num;
+	int			my_ep_out;
+	int			my_ep_in;
+	char			iManufacturer[BUFSIZ];
+	char			iProduct[BUFSIZ];
+	char			iSerialNumber[BUFSIZ];
+	char			iInterface[BUFSIZ];
+	int			is_usb2;
+	enum eeprom_type	eeprom_type;
+	enum eeprom_burn_state	burn_state;
+	uint8_t			status;
+	uint8_t			mpp_proto_version;
+	struct eeprom_table	*eeprom;
+	const struct interface_type	*fwtype;
+	uint16_t		tx_sequenceno;
+};
+
+/*
+ * Prototypes
+ */
+struct astribank_device	*astribank_open(const char devpath[], int iface_num);
+void astribank_close(struct astribank_device *astribank, int disconnected);
+void show_astribank_info(const struct astribank_device *astribank);
+int send_usb(struct astribank_device *astribank, char *buf, int len, int timeout);
+int recv_usb(struct astribank_device *astribank, char *buf, size_t len, int timeout);
+int flush_read(struct astribank_device *astribank);
+int eeprom_fill(struct eeprom_table *eprm,
+		const char *vendor,
+		const char *product,
+		const char *release,
+		const char *label);
+int astribank_has_twinstar(struct astribank_device *astribank);
+int label_isvalid(const char *label);
+
+#endif	/* ASTRIBANK_USB_H */