Big dump of newer xpp code.

For finer details and separate commits, you are advised to look into the
commit log of dahdi-{linux,tools}.

xpp.r7150

* 116x Astribanks:
 - Support for the TwinStar capability and for FXO and (BRI|PRI) on
   same device.
 - New control protocol ("MPP").
 - astribank_hextool - a low-level firmware loading tool instead of
   fpga_load .
 - astribank_tool - Other MPP activities .
 - Can still reset (but just that) through older protocol.
 - astribank_hexload is required for loading FPGA firmware for USB_FW.hex 
   rev > 6885.
 - USB_FW rev. 7071 . 
 - More modular FPGA firmware (1161 only).
 - FPGA_1161.hex rev. 7131. PIC_TYPE_* rev. 7107.
 - software-settings of some capabilities with astribank_allow .

* XPP:
  - init_card_* script are less verbose.
  - Reduced rate of "Is a DAHDI sync master" message.
  - Replace member bus_id with dev_name() and set_dev_name() for
    building with 2.6.30.
  - Conditionally remove 'owner' property of procfs was dropped in 2.6.30.
  - astribank_hook now enabled by default.
  - Has an optional hook for TwinStar.

* BRI:
  - hardhdlc support: The bri_dchan patch is no longer needed.
  - If bri_dchan patch applied: old code is used, and "dchan" is used.
  - If not: new code and "hardhdlc" is used.
  - zapconf will generate the right configuration, depending on the new
    sysfs driver attribute bri_hardhdlc, but default to "dchan" as
    before if not explicitly told.
  - Bugfix: explicitly turn off leds on startup.

* FXS:
  - Initialization and calibration fixes.
  - Notify the user just one about wrong VMWI config

* Dahdi-perl:
  - Fix detection of empty slots in wctdm.
  - Fix working with ethmf's extra file in /proc/zaptel
  - Improved detection of Rhino cards.
  - dahdi_genconf's generated text better explains files are generated.
  - /etc/xpp_order - allow specifiying an explicit order for
    Astribanks to register with Zaptel.
  - Dahdi::Xpp::Mpp - A wrapper around astribank_tool .

* dahdi.init:
  - A separate waitfor_xpds script. May now have a wait-loop in
    some cases.
  - xpp_sync needs to only be called after dahdi_cfg .
    (for the PRI module).



git-svn-id: http://svn.digium.com/svn/zaptel/branches/1.4@4641 5390a7c7-147a-4af0-8ec9-7488f05a26cb

1 files changed, 5 insertions, 41 deletions

diff --git a/kernel/xpp/utils/hexfile.h b/kernel/xpp/utils/hexfile.h
index f8bf6a9..27c71e7 100644
--- a/kernel/xpp/utils/hexfile.h
+++ b/kernel/xpp/utils/hexfile.h
@@ -1,6 +1,6 @@
 /*
  * Written by Oron Peled <oron@actcom.co.il>
- * Copyright (C) 2006, Xorcom
+ * Copyright (C) 2006, 2007, 2008, Xorcom
  *
  * All rights reserved.
  *
@@ -24,49 +24,12 @@
 #define	PARSE_HEXFILE_H
 
 #include <stdarg.h>
-
-/*
- * Some portability workarounds
- */
-#ifdef	_WINDOWS
-
-#include <windows.h>	/* for UCHAR USHORT */
-typedef UCHAR	uint8_t;
-typedef USHORT	uint16_t;
-#define	PACKED
-#define	sscanf	sscanf_s
-#define	ZERO_SIZE	1
-
-/* From /usr/include/syslog.h */
-#define	LOG_EMERG	0	/* system is unusable */
-#define	LOG_ALERT	1	/* action must be taken immediately */
-#define	LOG_CRIT	2	/* critical conditions */
-#define	LOG_ERR		3	/* error conditions */
-#define	LOG_WARNING	4	/* warning conditions */
-#define	LOG_NOTICE	5	/* normal but significant condition */
-#define	LOG_INFO	6	/* informational */
-#define	LOG_DEBUG	7	/* debug-level messages */
-
-#ifdef  __cplusplus
-# define __BEGIN_DECLS  extern "C" {
-# define __END_DECLS    }
-#else
-# define __BEGIN_DECLS
-# define __END_DECLS
-#endif
-
-#elif	__GNUC__
-
+#include <stdio.h>
 #include <stdint.h>
+#include <sys/param.h>
 #include <syslog.h>
 #define	PACKED	__attribute__((packed))
-#define	ZERO_SIZE	1
-
-#else
-
-#error "Cannot compile on this platform"
-
-#endif
+#define	ZERO_SIZE	0
 
 /* Record types in hexfile */
 enum {
@@ -101,6 +64,7 @@ struct hexdata {
 	unsigned int		maxlines;
 	unsigned int		last_line;
 	int			got_eof;
+	char			fname[PATH_MAX];
 	char			version_info[BUFSIZ];
 	struct hexline		*lines[ZERO_SIZE];
 };