diff options
author | tzafrir <tzafrir@5390a7c7-147a-4af0-8ec9-7488f05a26cb> | 2009-05-27 10:01:24 +0000 |
---|---|---|
committer | tzafrir <tzafrir@5390a7c7-147a-4af0-8ec9-7488f05a26cb> | 2009-05-27 10:01:24 +0000 |
commit | 18c6813f2c788b603dab363b9138d65d24252167 (patch) | |
tree | 92402484268f2bc1d5e4e55f7321b9204ad47c5f /kernel/xpp/utils/xpp_sync | |
parent | 2a73224819e867eaf56371d6055e2ca4d36396b6 (diff) |
Big dump of newer xpp code.
For finer details and separate commits, you are advised to look into the
commit log of dahdi-{linux,tools}.
xpp.r7150
* 116x Astribanks:
- Support for the TwinStar capability and for FXO and (BRI|PRI) on
same device.
- New control protocol ("MPP").
- astribank_hextool - a low-level firmware loading tool instead of
fpga_load .
- astribank_tool - Other MPP activities .
- Can still reset (but just that) through older protocol.
- astribank_hexload is required for loading FPGA firmware for USB_FW.hex
rev > 6885.
- USB_FW rev. 7071 .
- More modular FPGA firmware (1161 only).
- FPGA_1161.hex rev. 7131. PIC_TYPE_* rev. 7107.
- software-settings of some capabilities with astribank_allow .
* XPP:
- init_card_* script are less verbose.
- Reduced rate of "Is a DAHDI sync master" message.
- Replace member bus_id with dev_name() and set_dev_name() for
building with 2.6.30.
- Conditionally remove 'owner' property of procfs was dropped in 2.6.30.
- astribank_hook now enabled by default.
- Has an optional hook for TwinStar.
* BRI:
- hardhdlc support: The bri_dchan patch is no longer needed.
- If bri_dchan patch applied: old code is used, and "dchan" is used.
- If not: new code and "hardhdlc" is used.
- zapconf will generate the right configuration, depending on the new
sysfs driver attribute bri_hardhdlc, but default to "dchan" as
before if not explicitly told.
- Bugfix: explicitly turn off leds on startup.
* FXS:
- Initialization and calibration fixes.
- Notify the user just one about wrong VMWI config
* Dahdi-perl:
- Fix detection of empty slots in wctdm.
- Fix working with ethmf's extra file in /proc/zaptel
- Improved detection of Rhino cards.
- dahdi_genconf's generated text better explains files are generated.
- /etc/xpp_order - allow specifiying an explicit order for
Astribanks to register with Zaptel.
- Dahdi::Xpp::Mpp - A wrapper around astribank_tool .
* dahdi.init:
- A separate waitfor_xpds script. May now have a wait-loop in
some cases.
- xpp_sync needs to only be called after dahdi_cfg .
(for the PRI module).
git-svn-id: http://svn.digium.com/svn/zaptel/branches/1.4@4641 5390a7c7-147a-4af0-8ec9-7488f05a26cb
Diffstat (limited to 'kernel/xpp/utils/xpp_sync')
-rwxr-xr-x | kernel/xpp/utils/xpp_sync | 9 |
1 files changed, 7 insertions, 2 deletions
diff --git a/kernel/xpp/utils/xpp_sync b/kernel/xpp/utils/xpp_sync index 2840271..8167eb1 100755 --- a/kernel/xpp/utils/xpp_sync +++ b/kernel/xpp/utils/xpp_sync @@ -39,7 +39,7 @@ if(@ARGV == 1) { sub get_sorted_xpds() { my @good_xpds; - foreach my $xbus (Zaptel::Xpp::xbuses('SORT_CONNECTOR')) { + foreach my $xbus (Zaptel::Xpp::xbuses) { next unless $xbus->status eq 'CONNECTED'; foreach my $xpd ($xbus->xpds()) { my $isreg = $xpd->zt_registration(); @@ -198,7 +198,7 @@ from the '+' beside it. xpp_sync is normally called from the zaptel init.d script. The parameter it is called with defaults to I<auto>, but it is possible to override that parameter (e.g: set it to -I<zaptel>) through the value of XPP_SYNC in either /etc/defualt/zaptel +I<zaptel>) through the value of XPP_SYNC in either /etc/default/zaptel or /etc/sysconfig/zaptel . =head1 FILES @@ -207,8 +207,13 @@ or /etc/sysconfig/zaptel . =item /proc/xpp/sync +(Deprecated: no longer supported) xpp_sync is essentially a nicer interface to /proc/xpp/sync . That file shows the current xpp sync master (and in what format you need to write to it to set the master). +=head1 SEE ALSO + +zt_registration(1), ztcfg(1), README.Astribank + =back |