diff options
Diffstat (limited to 'kernel/wcte12xp/GpakHpi.h')
| -rw-r--r-- | kernel/wcte12xp/GpakHpi.h | 80 |
1 files changed, 80 insertions, 0 deletions
diff --git a/kernel/wcte12xp/GpakHpi.h b/kernel/wcte12xp/GpakHpi.h new file mode 100644 index 0000000..790bb3c --- /dev/null +++ b/kernel/wcte12xp/GpakHpi.h @@ -0,0 +1,80 @@ +/* + * Copyright (c) 2001, Adaptive Digital Technologies, Inc. + * + * File Name: GpakHpi.h + * + * Description: + * This file contains common definitions related to the G.PAK interface + * between a host processor and a DSP processor via the Host Port Interface. + * + * Version: 1.0 + * + * Revision History: + * 10/17/01 - Initial release. + * + * This program has been released under the terms of the GPL version 2 by + * permission of Adaptive Digital Technologies, Inc. The standard + * GPL disclaimer is given inline below for your convenience. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + */ + +#ifndef _GPAKHPI_H /* prevent multiple inclusion */ +#define _GPAKHPI_H + + +/* Definition of G.PAK Command/Reply message type codes. */ +#define MSG_NULL_REPLY 0 /* Null Reply (unsupported Command) */ +#define MSG_SYS_CONFIG_RQST 1 /* System Configuration Request */ +#define MSG_SYS_CONFIG_REPLY 2 /* System Configuration Reply */ +#define MSG_READ_SYS_PARMS 3 /* Read System Parameters */ +#define MSG_READ_SYS_PARMS_REPLY 4 /* Read System Parameters Reply */ +#define MSG_WRITE_SYS_PARMS 5 /* Write System Parameters */ +#define MSG_WRITE_SYS_PARMS_REPLY 6 /* Write System Parameters Reply */ +#define MSG_CONFIGURE_PORTS 7 /* Configure Serial Ports */ +#define MSG_CONFIG_PORTS_REPLY 8 /* Configure Serial Ports Reply */ +#define MSG_CONFIGURE_CHANNEL 9 /* Configure Channel */ +#define MSG_CONFIG_CHAN_REPLY 10 /* Configure Channel Reply */ +#define MSG_TEAR_DOWN_CHANNEL 11 /* Tear Down Channel */ +#define MSG_TEAR_DOWN_REPLY 12 /* Tear Down Channel Reply */ +#define MSG_CHAN_STATUS_RQST 13 /* Channel Status Request */ +#define MSG_CHAN_STATUS_REPLY 14 /* Channel Status Reply */ + +#define MSG_TEST_MODE 17 /* Configure/Perform Test Mode */ +#define MSG_TEST_REPLY 18 /* Configure/Perform Test Mode Reply */ + +#define MSG_ALG_CONTROL 27 /* algorithm control */ +#define MSG_ALG_CONTROL_REPLY 28 /* algorithm control reply */ +#define MSG_GET_TXCID_ADDRESS 29 /* get tx cid buffer start address */ +#define MSG_GET_TXCID_ADDRESS_REPLY 30 /* get tx cid buffer start addr reply */ + +#define MSG_PING 35 /* ping command */ +#define MSG_PING_REPLY 36 /* ping command reply */ +#define MSG_SERIAL_TXVAL 37 /* transmit serial fixed value */ +#define MSG_SERIAL_TXVAL_REPLY 38 /* transmit serial fixed value reply */ +#define MSG_TDM_LOOPBACK 39 /* tdm loopback control */ +#define MSG_TDM_LOOPBACK_REPLY 40 /* tdm loopback control reply */ +#define MSG_RESET_USAGE_STATS 41 /* reset cpu usage stats */ +#define MSG_RESET_USAGE_STATS_REPLY 42 /* reset cpu usage stats reply */ + +#define MSG_RESET_FRAME_STATS 47 /* reset framing stats */ +#define MSG_RESET_FRAME_STATS_REPLY 48 /* reset framing stats reply */ + +#define MSG_READ_DSP_MEMORY 49 /* read small section of DSP's memory */ +#define MSG_READ_DSP_MEMORY_REPLY 50 /* read memory reply */ + +#define MSG_ACCESSGPIO 51 +#define MSG_ACCESSGPIO_REPLY 52 +#endif /* prevent multiple inclusion */ |