diff options
Diffstat (limited to 'kernel/xpp/init_card_4_29')
-rwxr-xr-x | kernel/xpp/init_card_4_29 | 165 |
1 files changed, 0 insertions, 165 deletions
diff --git a/kernel/xpp/init_card_4_29 b/kernel/xpp/init_card_4_29 deleted file mode 100755 index 5dda0b2..0000000 --- a/kernel/xpp/init_card_4_29 +++ /dev/null @@ -1,165 +0,0 @@ -#! /bin/sh -# -# Written by Oron Peled <oron@actcom.co.il> -# Copyright (C) 2006, Xorcom -# -# All rights reserved. -# -# This program is free software; you can redistribute it and/or modify -# it under the terms of the GNU General Public License as published by -# the Free Software Foundation; either version 2 of the License, or -# (at your option) any later version. -# -# See the file LICENSE in the top level of this tarball. -# - -# -# $Id$ -# -# Data format: -# - A comment start with ';' or '#' until the end of line -# - Blank lines are ignored -# - Fields are whitespace separated (spaces or tabs) -# -# The fields are (in command line order): -# 1. DAA select in decimal (range 0-7). -# 31 is a special value which means ALL DAAs (only some registers -# accept settings for ALL DAAs). -# 2. Command word: -# - RD Read Direct register. -# - WD Write Direct register. -# 3. Register number in hexadecimal. -# 4. Data byte in hexadecimal. (for WD command). -# - -# ----------------------------------==== 8-channel FXO unit initialization ===----------------------------------------- - -set -e - -opermode='FCC' - -me=`basename $0` -INIT_DIR=`dirname $0` -XPP_BASE=/proc/xpp -export XPP_BASE -LOGGER="logger -s -t $me" - -ZAPTEL_BOOT_DEBIAN=${ZAPTEL_BOOT_DEBIAN:-/etc/default/zaptel} -ZAPTEL_BOOT_FEDORA=${ZAPTEL_BOOT_FEDORA:-/etc/sysconfig/zaptel} - -# read default configuration from /etc/default/zaptel -if [ -r $ZAPTEL_BOOT_DEBIAN ]; then . $ZAPTEL_BOOT_DEBIAN; fi -if [ -r $ZAPTEL_BOOT_FEDORA ]; then . $ZAPTEL_BOOT_FEDORA; fi - -if [ "$DEBUG_CALIBRATION"=1 ]; then - LOGGER=":" -fi - -# Always redirect stderr somewhere, otherwise the shell script will die -# when it tries to do I/O related stuff on closed file descriptor. -# Our default is to throw it down the bit-bucket. -exec 2> /dev/console -## If you wish to trace this script: -#exec 2> /tmp/xpp_init_$XPD_NAME -## Altenativly, if you have multiple XBUS'es: -#exec 2> /tmp/xpp_init_$XBUS_NAME_$XPD_NAME -#set -x - -# redirect script output to the "slics" (registers command) file: -exec 1> "$XPP_BASE/$XPD_BUS/$XPD_NAME/slics" - -$LOGGER -p kern.info "$XPD_BUS/$XPD_NAME: Initializing '$0'" - -# Several countries (South Africa, UAE, anybody else) -# require a shorter delay: -case "$opermode" in -SOUTHAFRICA|UAE) echo 31 WD 17 2B;; -esac - -# Remove empty lines and commets. Not strictly necessary -# but works around some limitations of the proc interface: -echo " - - -31 WD 21 28 -31 WD 18 99 -31 WD 06 00 - -# ----------- DAA PCM start offset ---------- - -0 WD 22 00 -0 WD 23 00 -0 WD 24 00 -0 WD 25 00 - -1 WD 22 08 -1 WD 23 00 -1 WD 24 08 -1 WD 25 00 - -2 WD 22 10 -2 WD 23 00 -2 WD 24 10 -2 WD 25 00 - -3 WD 22 18 -3 WD 23 00 -3 WD 24 18 -3 WD 25 00 - -4 WD 22 20 -4 WD 23 00 -4 WD 24 20 -4 WD 25 00 - -5 WD 22 28 -5 WD 23 00 -5 WD 24 28 -5 WD 25 00 - -6 WD 22 30 -6 WD 23 00 -6 WD 24 30 -6 WD 25 00 - -7 WD 22 38 -7 WD 23 00 -7 WD 24 38 -7 WD 25 00 - -# ----------- DAA ONHOOK -------------------- -31 WD 05 00 - -# Set tip to ring voltage to 3.5 volts while off-hook -# instead of default of 3.1 -31 WD 1A C0 -" | sed -e 's/[;#].*$//' -e '/^[ ]*$/d' - -# Turning off red LEDs -# Warning: do not send WD 31 20 A0 ! -for i in `seq 0 7`; do - echo "$i WD 20 A0" -done - -# based on fxo_modes from wctdm.c . -reg16=00; reg26=00; reg30=00; reg31=20; ring_osc=; ring_x=; -mode="$opermode" -if [ -r $INIT_DIR/init_fxo_modes ]; then - . $INIT_DIR/init_fxo_modes -fi -# Our register numbers are HEXADECIMAL! -echo " -31 WD 10 $reg16 -31 WD 1A $reg26 -31 WD 1E $reg30 -31 WD 1F $reg31 -" -# for the FXS: -#if [ "$ring_osc" != '' ]; then -# /bin/echo "31 WI __ $ring_osc" -#fi -#if [ "$ring_x" != '' ]; then -# /bin/echo "31 WI __ $ring_x" -#fi -$LOGGER -p kern.info "$XPD_BUS/$XPD_NAME: Ending '$0'" -exit 0 |