1 files changed, 66 insertions, 0 deletions
diff --git a/kernel/xpp/utils/astribank_hexload.8 b/kernel/xpp/utils/astribank_hexload.8
new file mode 100644
index 0000000..4017f78
--- /dev/null
+++ b/kernel/xpp/utils/astribank_hexload.8
@@ -0,0 +1,66 @@
+.TH "ASTRIBANK_HEXLOAD" "8" "29 March 2009" "" ""
+
+.SH NAME
+astribank_tool \- Xorcom Astribank (xpp) firmware loader
+.SH SYNOPSIS
+.B astribank_tool -D \fIdevice-path\fR <\fB-F|-p\fR> [\fIoptions\fR] \fIhexfile\fR
+
+.B astribank_tool [-h]
+
+.SH DESCRIPTION
+.B astribank_hexload
+is a second-stage firmware loader for Xorcom Astribanks. Note that some 
+older models use fpga_load(8) instead.
+
+It is used to load a file in the Intel HEX format into a Xorcom
+Astribank. It can be used to load either an FPGA firmware or a PIC
+firmware. It is normally run by the script xpp_fxloader.
+
+.SH OPTIONS
+.B -D 
+.I device-path
+.RS
+Required. The device to read from/write to. On modern UDEV-based system
+this is usually /dev/bus/usb/\fIbus_num\fR/\fIdevice_num\fR,
+where \fIbus_num\fR and \fIdevice_num\fR are the first two numbers in the
+output of lsusb(8).
+On older systems that use usbfs, it is usually
+/proc/bus/usb/\fIbus_num\fR/\fIdevice_num\fR.
+.RE
+
+.B -F
+.RS
+The firmware to load is a FPGA firmware.
+.RE
+
+.B -p
+.RS
+The firmware to load is a PIC firmware.
+.RE
+
+.B -v
+.RS
+Increase verbosity. May be used multiple times.
+.RE
+
+.B -d \fImask\fR
+.RS
+Set debug mask to \fImask\fR. Default is 0, 0xFF is "everything".
+.RE
+
+.B -h
+.RS
+Displays usage message.
+.RE
+
+.SH SEE ALSO
+fxload(8), lsusb(8), astribank_tool(8), fpga_load(8)
+
+.SH AUTHOR
+This manual page was written by Tzafrir Cohen <tzafrir.cohen@xorcom.com> .
+Permission is granted to copy, distribute and/or modify this document under
+the terms of the GNU General Public License, Version 2 any 
+later version published by the Free Software Foundation.
+
+On Debian systems, the complete text of the GNU General Public
+License can be found in /usr/share/common-licenses/GPL.